Top 20
HP LaserJet 3015 All-In-One Printer Questions & Answers
Reset error 57.03
Hi there, Lisa here. I would be happy to help you with your LaserJet 3015. I see you are getting a reset error 57.03. Please take a look at the following link, locate your error, and complete the recommended solutions:
HP LaserJet Error Codes 50 59
I hope this helps.
I work on behalf of HP.
Error code 358 mean?
From HP: "The remote user pressed the Stop key, causing the session to be terminated." Meaning the problem is at the location of the fax you are sending TO. Call them, and ask them to confirm that their fax device is ready and able to receive.
http://support.hp.com/us-en/document/buu02549
How to clear a paper jam?
straight paper path. take out tray and toner pop down back the paper will be in one of the places.. check for nicks or damage to leading edge of the paper. If its labels get back to us.
How to fix error 49.4C02
According to some information I found in some other forums, the best responses and fix methods all contained these steps
-- Quoting various sources---
The 49.xxxx errors are "communication errors" and can be caused by many things:Corrupted driver, corrupted firmware, corrupted print job, bad nic card (your printer has a built in network port), bad memory DIMM, bad formatter board etc etc.
Unplug the network cable, power off and then back on..........print a configuration page...........check that the printer sees the network port (if you see the IP address on the EIO page it sees it)...........if it doesn't see it you may have a bad formatter board (the network port is built in it).
If the printer works just fine while unplugged from the network, start replacing the network cable, otherwise you need to look into your network (end quotes). Best of luck in resolving, please update this message if it did solve it.
---
-----
Hp 3015 59.60
59.60 is a main motor error.
You will need a repair center or a tech to take care of your problem
Printing custom sizes on hp deskjet 3015
In MS Word, go to page setup then modify the paper size of the document.
Next, Press CTRL P to open the print dialog box, then select properties. Modify the paper size of the printer.
Hope this helps.
Scanner 52 error on my HP 3015 Laserjet
From HP.com - he printer is experiencing a critical printing error. Unplug the printer for five minutes, and then plug it back in. If the error persists, contact HP customer service at the number provided on the support flyer included with the printer, or visit
http://www.hp.com .
Very bed image on a paper
Print a couple of pages. As the printer is printing open the toner cover. Pull the toner cartridge out and look down at the paper. If the printing looks good the fuser probably needs replacing. Before doing that, have you checked the toner cartridge.
Not finding what you are looking for?