20 Most Recent HP LaserJet 3015 All-In-One Printer - Page 10 Questions & Answers

open the printer up , try cleaning the rollers with some alcohol. Possible some ink got stuck on the rollers at one point and when they heat up it streaks the page, other option is check your ink cartiridge that could be defective as well

If you are lucky, your printer manufacturer would have the software driver posted on their website for download. Find the website for the make of your printer and see if they provide a download file.
If not, there isn't much you can do.... (unless you have Windows 7, where you can search for drivers online)

Follow these steps to print on cards: NOTE: Make sure you have the cards loaded in the input tray.

1. On the File menu in the software program, click Print .
2. Select the HP All-in-One as the printer.
3. Open the Properties window. Depending on the program, the button might be called Properties , Options , PrinterSetup , or Printer .
4. Select the appropriate options for the print job by using the features available on the Paper/Quality , Finishing , Effects , Basics , and Color tabs. NOTE: Select the appropriate options for the print job by selecting one of the predefined print tasks on the Printing Shortcuts tab. Click the appropriate type of print task in the What do you want to do? list. The default settings for that type of print task are set as summarized on the Printing Shortcuts tab. If necessary, adjust the settings here, or make changes on the other tabs in the Properties window.
5. Click OK to close the Properties window.
6. Click Print or OK to begin printing.

many printer have senser on paper feder ,printer cover ,and other, there isnot attachment between paper fedder and sencer so u get this message i think, and also dust is barrer of them. that 'why open the cover of ptriter.and blow air by blower machine. inner parts of printer im sure it help u . it is not softwere problem. thanks

Just un install and reinstall.

If problem then keep me posting!

Open up the document feeder and clean the roller and pad with alcohol.

Go to HP.com to support and you can download the drivers for your printer.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

HP has posted a solution to this. You can find it here:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=378048&prodTypeId=18972&prodSeriesId=378048&objectID=c00159306

please rate solution :)

Check this link to get full information

h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=378048&prodNameId=378050&swEnvOID=228&swLang=8&mode=2&taskId=135&swItem=lj-18281-3

Should be   tools setting go to factory reset change language to English

The fax machine needs to be reset. Simply shut off the machine, wait one minute, and turn on machine & fax. If turning off the machine does not clear your machine then you have to unplug the machine & follow the same procedures. Worked for me.

Prosperity Office Worker

try to remove cartridge and look down in to printer, use flash-light or lamp to find. Also chek fuser unit ( exit unit) from paper.

install in 3015 scaning

nope

I have to ask the obvious? have you removed the seal?
If yes, then it's likely just a defect, especially if it's a compatible / remanufactured cartridge -replace it.

It is most probably the problem with line. Try to call from you fax machine and check the line condition.

why don't you try www.247servicecenterinfo.com, they have listing of all hp service centers in india.