Top 20
HP Officejet 5510 All-In-One Thermal Printer Questions & Answers
Black print is too light
Hi Barry,Remove all the cartridges, Clean the Golden ( electrical ) contacts with lint free cloth.Reinstall the Cartridges and wait for the printer to align.If the issue does not resolve, Press the Setup ( home ) button front panel. Scroll till you find Tools - Press ok, Look for Clean Printhead/Cartridges - Press OK.Wait for the process to complete and this should solve the issue.Regards,Sean
My hp inkjet prints lines on my printouts that are supposed to be there
Do you print regularly? When was the last time you changed the cartridge? If you've changed it recently it's likely that your printer head is dirty. Clean (hot water and paper towels in a discardable container.... allow to sit for a good while, wipe gently replace in printer) or just completely replace the head.
Error message printhead missing HP photosmart 5510
This indicates that your head is not correctly installed.Clean the contact surface with a tissue paper then try to insert it until it snaps in place. On hp printers the ink cartridge is the print head.hope it helps
What to do?
Clean Cartridge contacts in carriage assembly with solvent(Alcohol), try it. No result any one of carriage assembly or fomatter faulty, I wont suggest to go for repair because of it's expensive.
Hp printer not scanning
Copy is happening?If Yes: Reload the drivers, check for the permissions in system.If no:Scan head faulty, replace it.Scan head:
HP Photosmart C4140 error
hey, sometimes there are faulty cartridges. i use to got some brand new and original from the shop and not working.. so try it with some old cartridge if you have.. you can also try to remove the cartridge and clean/wipe the contacts on the cartridge side and on the printer side (turn of the printer for safety)
I am receiving a cartridge
In most cases the printer driver software can have errors while being in use or is shut down. So to reset remove your printer from the PC and uninstall the printer software. Now reinstall the printer software and then connect the Printer ONLY WHEN PROMPTED, to be detected as a new hardware as it will be installed. Now check the printer properties to see the ink levels.
Activate head cleaning before a test is taken. Sometimes it is possible that the head is not reacting to the need of the PC command or can be an issue with ink drying or poor ink cartridge contacts. Sometimes the power supply unit must be checked as a poor SMPS unit can deliver low voltage and cause issues to the printer function. Check all the leads and connections of the mother board , the tags to the ink cartridge. Also check the mechanical settings of the ink cartridge , if jammed or tight remove motor and manually free the drive before it is set back.
Thank you for using Fixya
Show me where to install ink for model hp
hello!
first, you need to lift up both the ADF unit and the flatbed scanner glass unit.
then, when the print carriage moves into view, press down and pull the ink cartridge for replacement.
Not finding what you are looking for?