20 Most Recent HP Color LaserJet 2600n Printer - Page 2 Questions & Answers

Fuser is not heating. Reseat the fuser, if that does not resolve the issue you will need to replace the fuser.

Replace the fuser.

Perform fuser cleaning procedure. If not helpful, replace the hot fuser roller. When worn out it collects toner and may lead to repetitive image.

Check out black ink level? If good do a hard reset of printer along with a software reinstall. If that does not resolve the problem you may have a defective print head or just a bad black cartridge since on may HP units the print head is built into the cartridge.

could be the fuser but there is a setting for heavy paper or card stock which will slow it down and increase the heat. depends on your model as to where this can be changed.

Is the cartridge new or a remanufactured one?

you should replace empty toner cartridge

If you are looking for the printer driver for your HP printer then -You can download the HP printer drivers from their supportWEB site. Please click on this link and select your model printer to download:-http://welcome.hp.com/country/us/en/support.html

This is not a SMALL error. It will invariably involve servicing by experts and parts. Workmanship and quality will depend on factors like country and skills availability. It might not be cost effective too. Please research if it is worth to repair rather than buy new model with warranty based on price of new and how old your printer is.

51.22 Error Turn off then on

Error message 51.22 Error Turn off then on Description Magenta laser scanner error. The device has experienced an internal hardware error. Action

1. Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.
2. If a surge protector is being used, remove it. Plug the device directly into the wall socket. Use the power switch to turn on the device.
3. If the problem continues, contact HP Customer Support Center for technical assistance athttp://www.hp.com/support/clj2600n or see the flyer that came in the printer box for additional contact information.

For what operating system? Although the support list for the Universal Print Driver only lists the 2605, I would try that first. Windows 7 has native support for the 2600 so you only need to tell Windows to check Windows Update for current drivers to have it install.

Hi this is Alex Walker I will be glad to help you fix your issue Call Me +1(404)981-1535

refers to an error on the Yellow cartridge; Yellow is designated as "02". there is a memory chip failure or memory chip missing on the yellow cartridge.

Hello Saleem !
You need to go to the printers Main Menu > System Setup > Print Quality > Replace supplies, anh just switch from "Override Out" to "Stop at Out"
This will solve you problem

No, the answer is not.
printer need all fo the ink cartridges in order to print.

if you wanna to keep your printer in good health plz don;t tray to use any refile toners