20 Most Recent HP LaserJet 1320 Printer - Page 3 Questions & Answers

What document you are trying to print? If it is Excel or Word document you have created a second blank page, reopen the document and delete the second empty page.

1. Turn off the printer and remove the power cord from the back of the unit. Leave the printer powered off for at least 30 seconds.

2 Press the power button on the printer and hold the "Go" button as the printer is powering on. Watch for the "Attention" LED to turn on and stay steady.

3 Release the "Go" button and allow the printer to continue powering on. The printer should now be reset

Read more: http://www.ehow.com/how_6809266_hard-reset-hp-laserjet-1320n.html#ixzz31kIyBHut

Fatal error., replace formatter board..

Open the back of the printer - make sure it is clear. Then remove the toner check throughout the printer - reseat the toner and try to print

This would be a function of your software not the printer. You need to modify the template that the checks are printed with.

Make sure the Automatic Duplexing option is enabled: Enter Control Panel then Devices and Printers. Right click the printer icon, then Printer Properties. Click the Device Settings tab. Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save. Now Automatic Duplexing should become available. My LaserJet 1320 will no longer do duplex printing with Windows 8

Hello:Check the main fuse if the unit blown especially if the unit is totally dead meaning no light on the main panel comes on. You may of had a power surge that blew the fuse. If you find the fuse good and the unit still does'nt power up then you have a power supply problem or something external of the PS is loading it down.

Go to "printers and faxes."
Right click on your printer and select "Printing preferences."
Select "Advanced" tab
Double click "paper output"
If "Copy count=2" then change to 1 and apply
IF IT ALREADY IS SET TO 1 THEN:
Set "copy count=2" then APPLY
Repeat the above and now set "copy count=1"

The process of setting and resetting the copy count fixed my issues.

may be problem with cartridge or scanner shatar......

may be out of paper ,or paper got jam,check properly & plz revert back.

hi The paper tray has a small lock at the bottom of the tray which is broken or dislocated hence try to fix it if its dislocated or you may have to replace the try itself. But still you can use it by adding paper to the full of the tray's capacity and pressing it gentelly downwards and push it back into the printer.

75% of all print defect problems with these printers are cartridges. Try a new cartridge first. If you are using refilled/remanufactured cartridges, do not expect the same level of black as true HP cartridge. Other 25% of problems are either dirt on the scanner or bad transfer roller. Try cartridge first!

Both LED are on. Or one of them. IF one Orrange LED on Means Paper Jam. Or out of Cartridge please check...

you might try a recycled cartridge and have a lot less invested.Sounds like your cartridge is empty.Is print quality bad or light?

Properties --> Device Settings --> Duplex Unit (for 2-Sided Printing): Not Installed ------ This need change to 'Installed'

must be fuser unit, look for these signs : 1- upper roller damaged 2- does not have a "polished " finish 3-lower roller has ripples /waves on it