20 Most Recent Speed Queen Speedqueen c60 220v-12426 Industrial Washing Machine - Page 10 Questions & Answers

How To Fix Washing Machine That Is Not Spinning or Draining

Sounds like the bearing on the drum went bad keeping it from spinning freely.

It has a large nut under the cap on the top of the agitator, but it will be the devil to remove due to a tight fit and corrosion.

Could be a lose spacer check in tehe back open the screws pop it off then you will have more acces

please ask a question

If you wish to get some details; check the site linked here. Pull up older posts. .. http://electro-medical.blogspot.com/

lint filter clogged wash once without clothes in it every so often or washing load material types mixed

The rubber of the filter stick to the hose due to time and heat of the water. Try to move "wiggle" it with your fingers to get it unstuck. Can even use the handle of a teaspoon for more leverage but try not to damage the rubber seal as it will not seal proper again when connected the tap. Clean with a nylon brush. If found impossible to remove, leave it as installed but immerse the hose end with the filter in a half cup vinegar for a hour or so to dissolved the chalk residue. Brush again with a nylon brush. Chalk remover can also be bought over the counter - same as the tuff sold to clean chalk inside electrical kettles. If every thing failed sit down with the hose end with the filter in one hand and a thin but strong/stiff piece of wire in the other hand and pry open each hole formed by the grid of the mesh.

Could be a restricted drain line. Where does the water drain into after it leaves the drain hose?

No way, haha. You might have contaminated water. report it to water works in your city.