20 Most Recent Hobart CL44e-2 Conveyor High / Low Temperature Dishwasher with 30 kW Booster Heater - Right to Left Operation - Page 5 Questions & Answers

Most likely sump temperature probe needs replacing.

Hobart commercial machines are designed to run with commercial chemicals. There will either be an internal dispenser or an external unit supplied by the chemical supplier. Rinse aid is dispensed directly into the boiler. Detergent to the wash tank. The chemicals used are commercial strength so not required in the same quantity as domestics.

https://www.hobart-export.com/support/documents-download/

On most hobart dishwashers, fil is a fault relating to either the fill solenoid or the water counter in the break tank

Heating element

Hobart are commercial machines so require commercial chemicals. Companies like Johnson diverse and ecolab are the usual favourites, but wherever you buy your cleaning equipment from will have a brand they can sell you. Most companies also provide and setup automatic dispensers with their chemicals. Find a supplier and ask them what they can do for you

No info needed. What is the fault you have and are there any fault codes in the display. Also, what is the model the the dishwasher

Hyg is not a fault. If you select program H, it will reset the counter. Hyg is in fact a clean cycle. To be honest, you can run the machine with the hyg message lit up forever without an issue. You can reset the light by running an hyg cycle

If it continues to put water in machine when switched off then fill solenoid, if not then possibly level sensor