20 Most Recent Waring Pro Deep Fryer - Page 2 Questions & Answers

I search a part of my pasta pasto Ps101. I need the die holder

im unsure but the part maybe able to be found on waring's website if they have one or you may call them to ask about the thermal fuse part from them

Replace the heating element.

Don't know which model you have but I have the DF-280. I had the same issue many people are having (my unit would not power on). The power cord is fine as I've confirmed this with a digital voltmeter. Turns out this particular unit has a safety switch on the right side of the metal/plastic brain unit housing. The switch is underneath the plastic protrusion that is perpendicular (or at a right angle) to the detachable electric plug. You probably won't notice it unless you look for it. My guess is the switch became less sensitive with use and despite being properly mounted to the fryer base, the brain unit did not recognize that it is properly mounted to the fryer base and therefore would not turn on. The easiest fix for this is to stuff a small piece of paper towel slightly into the slit where the switch is activated and then remount the brain unit onto the fryer base. Another option is to replace the switch or buy a whole new fryer. If your switch actually was the problem, it should now turn on and work properly as mine did. Hope this helps...

Turn power off. take off bottom cover and check power is coming the the Heater coils. If no power check for blown fuse. If you have power at Heater Terminals then you need a new Coil

You can cut the wall plug end off and buy a new plug end at Lowes, Ace Hardware, etc. Just need an electrical wire cutter to cut it and remove the outer rubber on the wires inside the cord, along with a small flat-end screwdriver to tighten the 2 screws onto the wires. Very cheap fix and it's very easy to do.