Top 20
ASUS T2 P4P8T WO/CD/MDM FM AGP8X GETH WIFI (t2-p) - Page 6 Questions & Answers
Mitsubishi WD-73742 Projector DLP Television. How do I clean the mirror on a WD73742?
To clean the mirror on a Mitsubishi WD-73742 DLP television, follow these steps:
- Power off the television and unplug it from the power source to avoid any electric shock.
- Remove the back panel of the television to access the internal components. Use a screwdriver to carefully remove the screws holding the panel in place.
- Locate the mirror inside the television. It is a large, reflective surface near the light engine or DLP chip.
- Use a soft, lint-free cloth such as a microfiber cloth to gently wipe the mirror. Do not use any cleaning solutions or chemicals as they can damage the mirror.
- If there are stubborn stains or dirt on the mirror, you can dampen the cloth slightly with distilled water and gently wipe the mirror in a circular motion.
- Once the mirror is clean, allow it to air dry before reassembling the television.
- Carefully replace the back panel of the television and secure it with the screws.
- Plug the television back in and power it on to ensure the mirror is clean and the image quality is not affected.
Is there any other way to charge my onn portable dvd player
You don't have to rely only on the original charger for your onn portable DVD player. You can charge it using other methods: * **Power bank:** Charge your player while you're out and about using a portable power bank. * **Car charger:** Keep your player powered even on long road trips with a car charger. * **Universal AC adapter:** Plug your player into a wall outlet with a universal AC adapter that's compatible with your device. These options give you flexibility and convenience, allowing you to charge your portable DVD player in different settings.
Viano model STV55UHD4K went black screen on free to air tv, no pic or sound. displays invalid service. EPG works, tried retuning dtv still no pic or sound but radio stations(abc, jj, etc) work
OTA singals are digital now there are no longer analog signals thus you need a strong enough antenna specailly if you live to far away from the tranasponder. Please make sure you have a adaquate Antenna Walmart, Best Buy and even Amazon has them for cheap.Make sure that you have in plugged in the Coaxe side and that you are scanning using the antenna selection and not the cable selection. Should you have a good enough antenna power cycling the TV does nothing you may need a part for the TV called a tuner board.
www.partstore.com should have the part. I would recommend if you do go this route that you seek a professional if your uncomfertable doing it yourself.The manufacture specially if its out of warrenty will not help in this matter so just telling you to power cycle or go to the manufacture is not the best answer.So to recap make sure you using a good antenna amplified ones are good roof ones are better. Make sure you have a good antenna because range is key also Line of site is also a key factor. I recommend roof top antenna over others because of signal issues. Should you absolutly require a indoor one the flat antennas I find are the best option. You can pick up one fore $20 bucks or so. The more money the better quality you get.Please also keep in mind and search out via zip code the location of your broadcast stations check out this website you will like it
https://www.antennasdirect.com/transmitter-locator.html.Thank you for using fixya.com
How to pairing Ruwido Amadeus R 9710 to tv?
To pair your Ruwido Amadeus R 9710 remote to your TV, you can follow these steps:
Insert Batteries: Your remote is powered by two 1.5 V AAA batteries1. Make sure to insert the batteries correctly.
Switch on your TV: Ensure your TV is turned on.
Press the TV key: Press the TV key on your remote control for approximately 4 seconds until the LED flashes twice.
Enter the Code: After seeing the 2 flashes and within 5 seconds, enter the 3-digit numerical code from the list provided with your remote2. After entering the code, the LED will flash twice indicating that the code has been accepted.
Test the Remote: Point the remote control towards your TV and press the key. If your TV does not respond by going into Stand-By mode then repeat steps 3 to 5 and enter the next code in the list.
Bed.-Anl. H2 Version1 (ruwido.com)
Why when i turn on my tv is the picture pink and negative like?
Potential causes and solutions:
High Contrast Mode:
Some TVs have a high contrast mode that can inadvertently cause the picture to appear negative or distorted.
Try this: Hold down the volume button on your Samsung TV remote and navigate to the settings related to contrast. Turn off the high contrast mode, and see if that resolves the issue.
HDMI Connection Issues:
A loose or faulty HDMI connection between your TV and an external device (such as a cable box, gaming console, or streaming device) can lead to color abnormalities.
Check the HDMI cable for damage and ensure it is securely plugged in. If necessary, try a different HDMI cable.
Additionally, an HDMI handshake failure during setup can cause color problems. Restarting both the TV and the connected device might help.
Picture Mode Settings:
Sometimes, the picture mode on your TV affects color accuracy. Modes like "Vivid" or "Dynamic" may exaggerate colors.
Switch to a more standard mode like "Standard" or "Cinema" to see if the pink tint disappears.
T-Con Board Issues (Specific to Some TVs):
If you have a Samsung TV, a polluted T-Con flat cable could be the culprit.
To address this, clean the contacts on the T-Con board using isopropyl alcohol. First, remove any dust. If unsure, consider seeking professional assistance
Not finding what you are looking for?
