20 Most Recent
Canon MultiPASS L6000 All-In-One Laser Printer - Page 9 Questions & Answers
Remove and clean printhead on Canon IP1300
To remove and clean the printhead on your Canon IP1300 printer, follow these steps:
- Turn off the printer and unplug it from the power outlet.
- Open the printer cover and raise the printhead lock lever.
- Lift the printhead out of the printer.
- Moisten a cotton swab with warm water and gently clean the printhead nozzles. Be sure not to touch the gold-colored electrical contacts.
- If the printhead nozzles are heavily clogged, you may need to soak the printhead in a solution of warm water and a mild cleaning agent for a few hours. Be sure to follow the manufacturer's instructions for the cleaning solution.
- After cleaning the printhead, shake it gently to remove any excess water, and then let it dry for a few hours.
- Once the printhead is dry, replace it in the printer and lower the printhead lock lever.
- Close the printer cover and plug the printer back in.
- Turn the printer on and perform a printhead alignment to ensure that the printhead is properly aligned.
If you are unable to clean the printhead or if the problem persists after cleaning, it may be necessary to replace the printhead. A new printhead can be purchased from the manufacturer or an authorized dealer.
Canon printing calculator will not advance paper.
If your Canon printing calculator is not advancing paper, there are a few potential causes for this problem:
- The calculator may be out of ink or ribbon. Check the ink or ribbon and replace it if necessary.
- The calculator's print head may be dirty or clogged. Clean the print head to remove any debris that may be blocking the paper from advancing.
- The calculator's paper feed mechanism may be damaged or stuck. Check the paper feed mechanism and make sure it is functioning properly and not stuck.
- The calculator's gears or other internal components may be worn or damaged. If the problem persists, you may need to have the calculator serviced by a qualified technician.
If you are unsure how to check for and address these potential causes, you may want to consult the user manual for your Canon printing calculator or contact the manufacturer for assistance.
Canon MX328
not work, in display printer shows error 5b00. I can't go to nv ram setting. Can you help me?
I have a Canon pixma
It looks to me that your non Canon cartridge has blocked the print head. I see this all the time. Remember the compatables are not pigment based but just watered down ink so you can get it to flow through a syringe into the cartridge. This however is the classic outcome of trying to save a few pennies on an expensive bit of kit!
Message comes up 'there is no paper load paper and press OK?
Hi,
if your device has multiple trays, please put paper in both trays before attempting to print again. I would also use any diagnosis apps that Canon offers on it's website for it's product after power cycling your device and restarting any computer that it might be attached to.
Thank you.
My Canon Pixma MP170 printer is not printing properly after I had to reset it.
The Waster Ink Absorber, does just that. When you switch the printer on a small amount of ink is forced through the nozzles in preparation for printing. When you Deep Clean, more ink is pulsed through. It doesn't alter print quality, so if it is not printing 'properly', the cause is something else. On most Canon MP, you can remove the cartridge holder and run hot water through it. Blot with tissue until there is no ink staining. You can get them serviced locally at a Canon Service Centre.
Not finding what you are looking for?