Baumatic B904SS Stainless Steel Electric Double Oven - Answered Questions & Fixed issues

Smooth on the inside.

spares4appliances has a good video

Do yu mean the front door has pulled off it's hinges on one side or both ? if you hold the door on a angle about 12" open then press down towards the floor it will go back into place , if not you may have bent the hinges and the will have to be replaced

It could be a burnt wire or loose wire. test the wires for amps with a electric tester

From the symptons described, I would say that the thermostat is faulty that controls the oven temperature, normal procedure is replace the faulty thermostat.

Have you set the clock right, ovens wont work if clock in auto mode

regadrs
richard saupe
appliance repairman Colchester

A tripped breaker or blown fuse on an electric oven or cook-top, combined with an element that has stopped working, is usually a sign of a shorted, then blown (if the fuse or breaker no longer fail) element.

If you know how to use an ohmeter, you can pull the element, disconnect the wires from each end, then measure the resistance between each end of the element, and each element to the outer sheath.

A good element has just a few ohms of resistance between the wire connection points, and infinite resistance from the wire connection points to the outer sheath. Any readings other than that means the element is bad and need's to be replaced.

Yes
Should be no problem as long as you have some kind of vetilation.

If fan is working then the element has probably gone

Check the elements for continuity. Some ovens will do strange things if one element fails due to shared returns. https://www.google.com/search?q=baumatic+bt2750ss+checking+element ..

Question moved from Misc. The model number is BA 'oh' and not BA 'zero'. Contact the Customer Care department direct. You are right, no manual online but there is this one, the BAO6009

Baumatic BAO6009-P Instruction Manual - Oven - ManualsLib

https://www.manualslib.com > ... > Oven > BAO6009-P View and Download Baumatic BAO6009-P instruction manual online. ... (34 pages). Oven Baumatic BAU91GG Operating And Installation Instructions. (24 pages). . Customer Care https://www.baumatic.com.au/commercial/customer-care ..

Hi, the fastest way to get access to the manual would be to call the company and ask them to email it to you. Then you can print it out on your end if you wish. Thank you.

this is usually the door not in place correctly or a broke ndoor hindge

Does this happen after you have used the oven and switched it off?
Some ovens have an overrun on the fans to cool them down quickly and should stop after a few minutes.
If this is not the case, it will need investigating further

Here's the operation manual: http://www.mychoice.co.uk/media/handbook/Baumatic/BO460SS.pdf

I searched using https://www.google.com but did not find an exact match for the model oven your provided. Although the following free manual has a similar model number, but is not exactly the same, it also has phone numbers and contact information for you to request a manual directly from the manufacturer. https://theelectricdiscounter.blob.core.windows.net/images/kitchen/cooking-appliance/baumatic/bs65ms/bs65ms_manual.pdf https://theelectricdiscounter.blob.core.windows.net/images/kitchen/cooking-appliance/baumatic/bs65ms/bs65ms_manual.pdf

the fan element is faulty

this is not the same model number as ba896ss but it might be similar https://www.appliancesonline.com.au/manuals/baf91eg/baf91eg.pdf

Not sure if this will help or not: https://manuals.appliancesonline.com.au/geh75u/geh75u-2.pdf https://manuals.appliancesonline.com.au/geh75u/geh75u-2.pdf

You may have a stuck thermostat and that should be replaced because he's probably telling the other keep eating even though the temperature the temperature would be correct think your new oven is too hot or too hot or too cold, you can adjust the temperature yourself to meet your specific cooking preference. You can also adjust your thermostat if your oven is not new, since thermostats may "drift" from the factory setting over time. See the "Adjust the Oven Thermostat"