Powermatic 1610077K Model 60B 8-Inch 2-Horsepower Jointer, 208/230-Volt 1-Phase - Page 5 - Answered Questions & Fixed issues
Ls1013 run slow speed replace switch
Makita chop saw
It can be a couple things:
1) Armature is magnetized
2) Soft-start module is bad
If you pull the armature, you will see the sides are shiny and worn from rubbing the field if it is magnetized
Likely your problem is the module though
6/14/2022 4:29:08 PM •
Saws
•
Answered
on Jun 14, 2022
•
390 views
WHERE CAN I FIND PART #63725 FOR SEARS 10 " RADIAL SAW START START SWITCH/RELAY
I ran into the exact problem. No support for my old, old radial arm saw.
I took the top off the arm, removed the old broken switch and replaced it by screwing a standard electrical box to the top of the arm, extending the wires and then using a standard light switch to make/break the circuit. Looks kinda dorky, but it works fine. There's no relay involved, as the motor has a step/start capacitor.
As always, this is my work around, and I do not recommend or advise you to do anything you're not comfortable with. All I'm saying is that you'll have to find another solution to the fact that the switch is no longer available. The saw works great, btw, and the switch is very handy on top of the saw arm. Good luck.
2/19/2022 6:51:46 PM •
Saws
•
Answered
on Feb 19, 2022
•
544 views
Not finding what you are looking for?