20 Most Recent
Powermatic 1610077K Model 60B 8-Inch 2-Horsepower Jointer, 208/230-Volt 1-Phase - Page 7 Questions & Answers
Ryobi bt 3000 table saw belt installation diagram
The BT3000 actually has TWO v-belts! Here's a link at the end of this solution to an exploded diagram. Basically you have a major disassembly, but it really isnt that complicated.
More great info on the BT3000 is available from the web site
http://bt3000.com/
I have a BT3100 saw, and it is a good tool, but does require attention in maintenance procedures, but Ryobi did outline the necessary steps in their manuals. The above website also has the owner manual if you need one.
- Unplug saw
- Remove the blade
- Lower mechanism all the way to the bottom
- Flip over saw and lay on it's top
- Remove the blade guard panel opposite the motor
- Unbolt the motor assembly and remove the belt cover
- Replace the broken belts
- Re-assemble (be careful not to cross-thread the bolts in the aluminum housings!)
http://bt3000.com/Manuals/BT3000-Parts-Manual.pdf
11/4/2021 12:27:12 AM •
Saws
•
Answered
on Nov 04, 2021
Canadian tire mastercraft parts
If the old tire is not badly damaged, I would glue it on with contact cement and carry on. Is the wheel close to the size of a bike tube? They come in all sizes, and stretch. A little scissors work and you have a new tire.
8/15/2021 1:02:26 AM •
Saws
•
Answered
on Aug 15, 2021
Manual for macallister flipover table saw
I just got it, here's the file if you're still interested: https://www.dropbox.com/s/7jz9kepfzuwcucx/MacAllister%20Flip%20Saw%20COD2000FLS.pdf?dl=0
7/30/2021 2:39:44 PM •
Saws
•
Answered
on Jul 30, 2021
Not finding what you are looking for?