20 Most Recent
D-Link DCS-3220 Network Camera - Page 8 Questions & Answers
What is router
Basic steps to configure your router:
- Set Up IP Address and Sub-net Mask for their router.
- Now open the router Web Page by 192.168.0.1 in the browser URL.
- Login with your User Name and Password.
- For Manuall Configuration and Set-up router according to your ISP.
Router have different configuration according to Model. for more router support http://support.dlink.com/ and any router related technical support D-Link Router Support .
Why wont my tablet authenticate
Check to make sure you have the correct wifi password and that other devices can connect to the same wifi using that password. Power cycle your router. If those dont work might have to try changing the Wifi security encryption type to WPA or WPA2. Would need to login into your router to do this.
Radio lg kf510
visit dlink website, they have lots of advice. you can google the URLyou want
http://support.dlink.com/emulators/wbr2310/lan.htm
DAP-1360
You "bricked" it -- responsibly recycle this "dead" unit, and replace it.
What default ip address d-link access point dsl-2640u
Connect your computer to the router.
Assuming Windows 7, click the "Start" button.
Type 'cmd' into the search-box, and press ENTER.
Type 'IPCONFIG /ALL'.
Look for the IP-address of the "gateway" or "DHCP-server".
Type that IP-address into your web-browser.
Crack password
Reset the router to "factory default",
which resets the ID/password.
Then, reconfigure your router.
I have an issue with Wireless Access Point D-Link
Do other wireless laptops connect to your wireless router, and give good speeds? Do you have many wireless networks, other than your own, that show up when you try to connect? It could be interference from other wireless networks in your vicinity.
Can get configuration addess to work
Connect your computer to your router.
It should automatically get an IP-address.
Click the Windows "Start" button (Windows 7).
Type 'cmd' into the search-box.
Press ENTER.
Type 'IPCONFIG /ALL'.
Look for the IP-address of the "gateway", or the IP-address of the "DHCP-server".
That is the IP-address that you want to type into your web-browser.
Can not set password
Straighten one end of a paper-clip.
Push it into the hole in the back of the router.
Hold it for 30 seconds.
The router is now set to "factory" settings,
including the original ID/password.
Not finding what you are looking for?