D-Link DSL-300T Modem - Answered Questions & Fixed issues

Call your service provider and get them to run a line check.

I HAVE A DNA-A211-I BSNL MODEM. I RESET IT CONTINUE 4-5 TIME AND AFTER RESET IN MODEM DSL AND WLAN IS NOT WORKING AND MODEM IS NOT CONNECTED TO MY PC. I USE WINDOWS 7 HOME PREMIUM. RESET BUTTON IS NOT WORKING. SO PLS SOLVE MY PROBLEM.

change the address to 192.168.2.1 this is the standard for most modems. you will have to log in to make changes just push submit to use no password.

hi,


At the back of your modem there is small hole that is the reset button try to reset your modem and if still freezing update the firmware, and check all the cables plugged on it if it is properly crimped.



thanks,

i cant open any video online , like see any movies or and signal online , it is give me erroe 103 how i can do it

In order to enable DHCP back in your computer, Please follow these steps:

Click on start than go to control panel than network connection, in Network connection right click on Local Area connection and go to properties there you need to select internet protocol (tcp/ip) and than click on Properties Tab there you will find two options to select

1. Obtain the Ip address automatically
2. USe the following Ipaddress

You need to select Obtain the Ipaddress automatically and than Obtain the DNS server address automatically

Than click on Okay and it will enable you DHCP server,

You just need to press RESET button on the back of the router. THis will reset router back to factory settings. then open internet explorer and type in address 192.168.1.1 - press enter key. THis will bring up the login screen for router
Default login and pw are
Login: admin (or maybe Admin)
Pw: admin (or maybe Admin, or blank)
Login and setup router

try the driverguide.com or check the manufacturer website for driver in the support or download section

Guys who want to Download cheap Microsoft office 2016. You can click: http://microsoftkeydownload.blogspot.kr/515293381991299/ . All relevant key Microsoft Office on this, absolutely genuine.

Contact your telephone-number and ask for the "Help Desk" for support for your DSL modem.

Probably because your home network (by which I mean your modem/router) is not wireless (WiFi). That's also why you have to "wire" your laptop to your network with an Ethernet cable, instead of using it wirelessly.

Should be on label posted on bottom of device..

You can find the details of the operator and the state they belong to .the operators wont reveal the address and name of any mobile numbers only higher officials can only get those information.
In order to trace the operator name and state you can try this link
http://www.indiatrace.com/trace-mobile-number-location/trace-mobile-number.php

I hope this will help you if it does do rate the answer
Thank you
regards
lalith

I am sure it is now toast and you cannot downgrade if the wrong firmware has been installed. I would ask D-Link.

https://www.youtube.com/watch?v=zKeXtyUMKjA Check out this video it might help you with your issue.

Please open router page and go to advanced just like in this emulator. http://support.dlink.com/emulators/wbr2310/adv_network.htm

try changing the channel number from auto to a channel number 2 or 3 higher than the lowest channel number.' do this by logging into the d-link dsl 2640

Ethernet/USB Print Server it is for even windows 98 (OMG ) page 7 is setup. NO OS stated by you, at all. why:? page 3 is OS compat. after reset the default address is 192.168.0.10 5volt power pack is NOT OPTIONAL. 1998 what did you read the free manual yet. the last page shows printer compatibility list, does your match? where would you find a printer that old working now. crickets...??? my guess is 2003 year made. XP first release is that. one manual for it stamped 2003 so is 17 years old relic fodder for sure, recycle it is best. first hit https://eu.dlink.com/-/media/consumer_products/dp/dp-300u/datasheet/dp_300u_datasheet_en.pdf RTM ! no 17 year old printer works today, not really.

the manual is free , at dlink dot com you push the reset button for long time per manual 15sec (iirc) the release it and now all defaults are set. per the manual, google dir-655 manual. easy as pie if you just read the manual.

You can get best d-link router support phone number at Toll Free Number ( 1-877-769-0969 ). D-link router Tech Support number ( 1-877-769-0969 )