Dell A940 All-In-One InkJet Printer - Answered Questions & Fixed issues

hi,Does your PC display a found new hardware message after printer connect?
Please re-check your printer's connection to the PC.
Restart your PC.
Power on the printer
Insert the installation disk.
On the start menu,click on printers and faxes
Select add a printer and follow the add a printer wizard.


GOOD LUCK

A dell printer is the best and adjusted planned to meet ordinary printing necessities for home similarly as the business condition. Actually talking, a dell printer is a prominent gadget device using over the globe that advisers for translate the substance including plans which is engraving as a page. Thusly, a dell printer builds up achievement in business and completions our task at a specific time. If there is required any specific assistance, by then call at dell printer particular assistance number objectives for dell printers through avowed specialists through which they get customer's · First check all printer accessibility close by its device status · Recheck the OS similitude with dell printer · Supporting to present the latest printer driver and how to invigorate them · Fixing how to make a course of action, foundation, planning, the wired/remote · Support how to organize and check the firewall printer setting turning away consequent to working · How to dissect and bolster the exploring adventures from paper feed bugs · Renders minute support to print the best quality · Proffers common upkeep for dell printers aggravations when they are in a predicament. Our lord gathering of dell printers is available for 24*7*365 days in a year. Get in touch with us Dell Printer Customer Care Phone Number +1-833-260-7367 https://easysupportnumber.blogspot.com/

Hi Marthawinter, I support the advice given by the first installer, please remove you telephone number. You appear to have tried most of everything, if your printer has excess to use a USB to printer cable, I suggest this is your best way to proceed. Once you have achieved connection via this medium, you can then avail of a wireless selection. If not, find the wireless set up on your printer and press the WPS button on the printer this should allow connection. Regards Ada

this happens a lot with Dell..

check the usb cabled if not then uninstall the Dell Printer AIO software and reinstall it

try installing the driver for the printer

Ed zagorski, You will need to call the Dell Spare Parts department to see which part you actually need. I dont believe it is just a bulb or lamp. The number to call is 1-877-717-3355. US Thank You,' Dell-Jesse L Dell Social Media and Communities

Yes. But it could be the on/off switch on the printer too.

If it can get dirty then the seals are broken. Get a new printer. Terry

jojo, Click the link below for information and steps installing your Dell A940 Printer on your computer. http://dell.to/1y1FfWw Thank You, Dell-Jesse L Dell Social Media and Communities

Go to www.support.dell.com

Go the printers web site. Go to support, downloads,drivers, install the driver for your model, and start all over. Sometimes the cd can be out of date.

Try find another printer(same model- says printer B)...take printer head from printer B to your printer(says printer A),use your ink cartridge and test your printing....if all color seen on paper, then the problem is your printer head, to make sure is it true or not, use printer head from printer A into printer B.see the result...

I would not worry about the ink on the inside of the printer. This is almost certainly just waste ink that has splattered here during printing/cleaning. The printhead is forced to face directly down inside the printer and if it was not this would cause the cartridge to be rejected and stop any printing. If your pages are coming out blank I would recommend taking the following steps:

1. First off please run any printer head cleaning cycles available from your printer software and check the quality of your prints.
2. Fold a piece of kitchen tissue or any other non fibrous tissue and dab it under a tap to make a small damp patch. For best results make sure the water is warm.
3. Take the cartridge out of the printer and hold the damp patch over the printhead for 30-60 seconds.
4. You should now hopefully have a small ink soaked patch on the tissue with traces of all the relevant colours.
5. Then wipe the printhead several times on the dry part of the tissue and you should start to see the colours come through.
6. Reinstall and run one more head cleaning cycle and with any luck you should be ready to print.

Sadly these cartridges are getting on a bit now and it is entirely possible that the printhead of the cartridge has stopped working entirely or is irreversibly clogged. If the cartridge has been purchased recently contact whoever you purchased it from. if not I would recommend buying a new black/colour ink cartridge.Source: http://www.refreshcartridges.co.uk/igloo/refilled-cartridge-not-printing-correctly/

update driver or use another driver version some problem in driver not compatible with you pc

have you tryed shut down / reset .

Hi Storm:http://support.dell.com/support/topics/global.aspx/support/kcs/document?docid=266321you will find instructions and download links for your printer here.cheersdebbe

Replace your Ink Cartridges. Ink dries up fairly quickly, sometimes only lasting a few weeks if the printer is frequently unused. I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Hi Barbra,Check all connections.Have you installed the printer drivers?Try un-installing and installing the printer drivers again.Was there change in the operating system?[Say you were using windows xp and now you're using windows vista]You may need to install the driver that corresponds with your operating system.You can download the drivers from this link:www.siliconguide.com/drivers/device/583/Hope this helps.Thanks!

Hi
To solve this issue unplug the unit and take out the cartridges then clean the print head which is the area beneath the cartridges with a hot water towel, let it dry out for a while and see if it works again. Hope this helps...please post back for further assistance.
Daniel

change the black cartridge