20 Most Recent Xerox 6500/N Phaser Laser Printer Questions & Answers

Changing waste container

The is no waste container on Phaser 6500. There is a "waste collection box" in every toner cartridge and the waste toner is discarded along with the empty cartridge. The is also a waste toner reservoir on the transfer belt and this one will be replaced along with the transfer belt.

If there is an error message saying, for example, "Waste Full Cyan Cartridge", it means the waste toner counter reached the replacement value for that color and you have to replace the corresponding cartridge. But the waste collection box is not really full.

Xerox 6500/N... | Answered on Nov 06, 2019

0 Answers

Xerox phaser 6500 just installed a 250 sheet paper feeder but printer does not recognize it

Xerox 6500/N... | Posted on Nov 08, 2016 | Be the first to answer

0 Answers

Where is the Xerox 6500 Selenoid located

Xerox 6500/N... | Posted on Oct 10, 2016 | Be the first to answer

0 Answers

Xerox black developer fade printing

Xerox 6500/N... | Posted on Apr 25, 2016 | Be the first to answer

1 Answer

How can I reset my page counter of a Xerox 6505

put a new nvram chip in the processor pcb...but you also loose all your other configurations as well...

Xerox 6500/N... | Answered on Jun 06, 2014

0 Answers

Color is faded on a portion of the paper

Xerox 6500/N... | Posted on May 07, 2014 | Be the first to answer

0 Answers

Error code 042-372

Xerox 6500/N... | Posted on Apr 19, 2014 | Be the first to answer

1 Answer

Is there a service mode on the xerox phaser 6500 ?

To enter Service Diagnostics on Xerox Phaser 6500:
1.turn the printer off ;
2.press and hold both the Up and Down arrows and turn the printer on ;
3.when Service Mode and ESS Diag appear on the display, release the buttons. You will need a Service Menu Map to navigate through the menus, they are quite complicated.

Xerox 6500/N... | Answered on Mar 21, 2014

0 Answers

I have changed the image drum i now have error

This code indicates a failure in the ADC Sensor circuit. Fixing it does not seem to be for the faint of heart . If you are feeling brave check out this thread:

http://www.copytechnet.com/forums/xerox/21835-xerox-7132-error-code-092-310-a.html

Sorry I could not offer you a definative solution directly.

Xerox 6500/N... | Answered on Oct 31, 2013

0 Answers

How do I correct "Waste Full Black Cartridge" error xerox 6500

Xerox 6500/N... | Posted on May 22, 2013 | Be the first to answer

0 Answers

Xerox phaser 6500 will not print from tray 1

Xerox 6500/N... | Posted on Aug 28, 2012 | Be the first to answer

1 Answer

Need help with Xerox Versalink B405. It show's error 016-322. How to fix it?

Link attached

Xerox Office... | Answered 3 days ago

1 Answer

What the fault toner control system failure xerox 5855

Ensure that the flat side of the Xerographic latch is tight against the flat edge in the indentation on the front of the Xerographic module. Press on the left side of the toner cartridge to ensure the developer assembly is touching the Xerographic module.

Xerox Office... | Answered 3 days ago

1 Answer