Top 20 NEC NP410 3LCD Projector Questions & Answers

Its the dlp/dmd chip going and soon will look like the star screen saver on windows 98. it will need replacing. they start with one or two dead pixels then it spreads. ref only->https://www.replaceyourlamp.co.uk/projector-lamps/nec/np-u250x/dmd-chip-1076-6439b/dlp-dmd-chip-1024x768-pixels-model-b.html

All here and also the Service Manual in Scribd.

C4101 error code Bizhub 350

Copytechnet https://www.copytechnet.com > ... > Konica Minolta Apr 23, 2010 - C4101 code at power up. Description: C4101 code at power up. Solution: PROBABLE CAUSES: 1. Failed PWB-A (Mechanical CB). Missing: NEC ‎IT3640D

IT40D Series Service Manual ' PDF

Scribd https://www.scribd.com > doc They are sharp and may hurt you. Be sure not to leave the packing material inside the system. It may cause a system malfunction or a fire.

SOLVED: Error code c4101 - Konica Minolta

Fixya https://www.fixya.com > ... > Bizhub 362 Copier Oct 25, 2012 - THE COPIER DISPLAYS ERROR C4101. C -4101 Polygon motor error. Change the polygon motor ,if you can not reset the malfunction code.

Based on the information provided, it is possible that there may be an issue with the projector's power button or internal components. It is recommended to try the following troubleshooting steps: 1. Check the power source: Ensure that the projector is properly plugged into a working power outlet and that the outlet itself is functioning correctly. 2. Reset the projector: Some projectors have a reset button or option in the settings menu. Try resetting the projector to see if this resolves the issue. 3. Check for internal issues: If the above steps do not work, there may be an issue with the projector's internal components. It is recommended to contact a professional technician or the manufacturer for further assistance. In summary, if a NEC projector indicates light when plugged into a power source but does not turn on when the power button is pressed, it may be due to issues with the power source, internal components, or other factors. Troubleshooting steps such as checking the power source and resetting the projector may help resolve the issue, but professional assistance may be required if these steps do not work.

1. To turn on your NEC P350x projector, press the power button on the top of the projector. 2. To reset the timer on your NEC P350x projector, press the Menu button on the remote control. Then navigate to the "Timer Settings" menu and select the "Reset" option.

If they are not physically broken, brake cleaner and cotton wool will get them clean. Don't put them back in the wrong way around!

Don't know if this will work as I don't run anything from Microsoft. I sue a proper OS; Linux. https://driversol.com/drivers/printers/microsoft/nec-superscript-860

I suspect the ballast (supply for the HID lamp) has failed due to an expired lamp. Probably not ecconomic to repair.

M300w use LCX102 LCD panels Sony Lcd panel is not durable the font strokes are weak, The color of the black font is not black enough It means the lcd panel is failed there are 3 lcd panels in the projector Red Green Blue 3 lcd panels are failed you need a new whole prism block with 3 lcd panels

Incorrect replacement lamp I would think.

Six flashes is lamp error. Either the lamp and/or balast unit has failed.

Your statement indicates'there is a fan issue'. It may just require cleaning but may need replacing. Nothing to do with the lamp, unless it has overheated and also needs replacing.

In some such equipment, there could be a problem of overheating of some component or assembly and due to overheating, there might be some sensor which is as a safety measure keeping the equipment off. I had seen some such equipment which stopped working when overheated but worked again when the temperature was normal. My experience belongs to the time when there was nothing like shutdown and we had to manually off the overhead projectors. Anyway, one can check for excessive heating at places and then doubt a particular part of the projector which may require replacement.

I supply all the parts polarizer for MX271 USD20 I am an expert of repairing projectors for 19 years. It is my pleasure to receive the message form you, WhatsApp ID:+8613178867858 Skype:[email protected] Wechat ID:+8613178867858 Email:[email protected] Email:[email protected] Mobile:+86 13178867858 http://www.lampdeng.com

I am an expert of repairing projectors for 19 years. It is my pleasure to receive the message form you, WhatsApp ID:+8613178867858 Skype:[email protected] Wechat ID:+8613178867858 Email:[email protected] Email:[email protected] Mobile:+86 13178867858 http://www.lampdeng.com

http://www.support.nec-display.com/dl_service/data/manual/en/ve280x/VE280X_manual_ENG_v7.pdf http://www.support.nec-display.com/dl_service/data/manual/en/ve280x/VE280X_manual_ENG_v7.pdf

Possibly on Amazon. You might want to carry the equipment to a local retail store and ask the salesperson to show you the correct cable. Computer Stores, Office Depot, Staples, and even Walmart may carry the correct cable. Examples: https://www.amazon.com/UNMCORE-Plated-DVI-D-Converter-Adapter/dp/B01D1IXTY6/ref=sr_1_3?s=electronics&ie=UTF8&qid=1527115872&sr=1-3&keywords=DVI-D+Dual+Cable+to+HDMI https://www.amazon.com/StarTech-com-HDMI-DVI-Cable-Monitor/dp/B0002GRUIC

On the laptop there should be function keys that control the display. Look at those and see if it is F4 or F5 and then use the FN key to change the display mode.

Without remote is not possible. Any way try press and hold the power bottom on the projector About 4 seconds while projector is in standby mode . Not sure it will work but you can make a try. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electro-medical.blogspot.com/

How to Reset a NEC Projector Lamp Timer ... - RelampIt

www.relampit.com/Projector-Lamp-Timer/NEC-Projector-Lamp.php

How to Reset a NEC Projector Lamp Timer. Make sure the projector is in standby mode; Press the Off or Help button on the remote control for a minimum of 10 ...

NEC reset lamp without remote Questions & Answers - Fixya

www.fixya.com/tags/reset_lamp_without_remote/browse/nec

My bulb warning had just recently appeared a few weeks prior, so I thought the bulbmust ... ...reset the Lamp timer o an NEC MT1050 projector. ... ...reset lamp usagetime without the remote on NEC VT490 HelloPress the MENU button on the ...

reset lamp hours nec projector without remote Questions ...

www.fixya.com > Forum > Tags

Find solutions to your reset lamp hours nec projector without remote question. ... My nec vt48 projector gets hot and turns off. It ... Question about VT700 Projector.

Replacing The Lamp - Nec VT700 User Manual [Page 58]

www.manualslib.com > ... > Projector > VT700 > User manual

http://www.nec-pj.com/dl_data/lt380_manual_e.pdf Scroll to page 107 and read through the various light blinking codes. This will help you figure out exactly what the blinking light error is and what steps are needed to correct it. If you are still having trouble please respond with further information for more in depth troubleshooting. If you need further help, I’m available over the phone at https://www.6ya.com/expert/thomas_e8f475a8655f7b4a