20 Most Recent
NEC NP410 3LCD Projector - Page 8 Questions & Answers
I received a file from
you will have to contact them and ask them to save the file as a image file instead, the only way , that i know how to open that filetype is by using NEC's scanner software, which created it
I have a VT465 and the projection back ground is
If you are talking about the actual image that is coming from a laptop being yellow instead of white, then this is caused usually by a bad signal cable running between the computer and the projector.
To be more specific: All colours in a projector get made up in some way between red, green and blue. White is all of these colours at maximum, yellow is made by red and green at maximum but no blue. If your image is Yellow when it should be white, then the blue signal information is not reaching the projector. This can also happen within the projector or computer itself but is less likely. If your using a VGA cable (15 pin cable) then blue is run through pins 3 & 7 (positive and negative respectively), see if your cable is either missing these pins on either end or if they are bent, although it's more than likely within the cable itself. You can test this theory easily by trying to put something blue on screen, if the blue signal isn't getting through then it'll appear black.
If changing the cable doesn't solve the problem try testing the computer by trying to use a different one, and test the projector by plugging in a monitor or another projector.
If you are getting a yellow screen without sending signal and just trying to get the "no signal" or "no input" screen white, then this won't be the case.
I have an NP510 projector
Hi,
Welcome to Fixya. If you need the audio of your presentation please check the connection if it is correct please refer to
page 14 of the instruction manual. Please make sure that the cable from your computer is connected to the green port. if it is connected to the front port of the computer please try the port at the back. If you have spare cable it would be better to check if the cable is not working.
NP510 Projector ManualIf you have questions please let me know.
Thanks for using Fixya.
85.1x12.7mm printer setup is not
Sounds like you're missing the proper drivers. Download the latest drivers from the manufacturer's website and you'll be set to go.
My nec vt48 projector gets hot and turns off. It
This problem and the error beep codes indicate a lamp that needs to be replaced. The correct part number for the lamp is VT85LP. Basically the lamps are rated with a life expectancy of 2000 hours. At the 2001 lamp hour (3001 in eco-mode) the LCD projector will power on, but not display an image, due to the indicator requesting the lamp be replaced and the lamp hours reset (hold the help button on the remote for 10 seconds when powering it on).
I bought a second
Capacitors on the main board have leaked and corroded the tracks on it. very big repair and very common..
I'm getting The job under
If there is an active job printing or copying when you try to logon, you will receive this error. Check the ;Jobs; tab and wait until the job is complete.
NURIT 2085 (i cant figure out the passcode)
At the password prompt, if you press the alpha key you can get the date the terminal thinks it is. use that. Sometimes some terminals are wrongly programmed therefore the internal clock may be off, setting the password off.
My projector turns on but
If it is the lamp there is usually an indication to inform you. A light will flash or change colour etc. If the ballast unit has failed or a fan has stopped working a similar effect will be produced.
Check the indicators and refer to your instruction manual. If you haven't got one or it has been mislaid, browse NEC's web site for instructions.
www.nec.com
12/26/2010 11:17:11 AM •
NEC Office...
•
Answered
on Dec 26, 2010
Hi We have the NEC
do you mean abbreviated dialing or the function keys on the phone itself?
NEC NP200. Projector turns on
I'm a techie with a school district and have the same problem. My suspicion is it's a lamp issue, though the teacher using it says there was no low hours warning. Unfortunately I don't have a spare to try out so if anyone can state categorically that it IS the bulb then I will purchase one.
Not finding what you are looking for?