20 Most Recent Emerson Lc320em1 TV Questions & Answers

what does the set do when you press power? Does the Power indicator come on solid, blinking or etc.

Sounds like corrupted software. A software update might be necessary. Contact any service technician. These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices Electro help

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

What type of TV do you have. If it's a smart TV it may need to be rebooted it depends on the TV type if you press the power button and the volume button at the same time and wait for it to reboot it may solve your problem

Buy a replacement and pay for the extended warranty.

check batteries in remote. change to new ones. unplug the set for 5 minutes and then replug to see if resetting the electrical is the problem. sounds like remote is faulty.

2109,2185. Check these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name" in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box. http://electronicshelponline.blogspot.com/ http://remotesearch.blogspot.com/ http://electro-medical.blogspot.com/ http://electrohelponline.blogspot.com/ Type in the brand name of your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.

Short circuited component/s at its main board. Contact any serviice technician. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box and press "Enter". http://electronicshelponline.blogspot.com/

Good day, You could provide some more information here. Do you see a splash screen or does the screen light up at all? I am going to guess that the power inverter (this powers the back light(s)) is bad. Usually, this is a simple unplug and swap part. Here, eBay is your friend. The part may be called a DC to DC converter or DC Power Inverter or just back lamp power supple. Good luck...

The power supply regulator board to your TV is now working fine, and has no problems at all, as, there is standby light. Check all the other voltages comes out from the power board, to main board. If all of it found OK, the fault should be at its main board. About blinking of standby/power light; These blinks (flashes) are fault indication. By the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside the TV. Count the blinks occur at one time switch ON, carefully. Do it once again, and make sure about the number of blinks. If the flashes are continious, non-stop, the main system control IC should be suspected. If you wish to get more details, check the site linked here. It has blinking codes detail to many brand TVs. Pull up older posts. Check the site in 'Mosaic' view. It will make search easy. http://electronicshelponline.blogspot.com/

This television is defective and either needs a software update or to be replaced.

Check and replace its main digital board. It is faulty.