20 Most Recent Gigabyte GA-7IX Motherboard - Page 9 Questions & Answers

Here: http://www.gigabyte.com/support-downloads/download-center.aspx?kw=GA-6V

Download the right driver from here: http://www.gigabyte.com/support-downloads/download-center.aspx?kw=8i915&ck=2

Try new SATA cables, check if they are OK and connected on RIGHT primary SATA connection (NOT on RAID). If you have another HDD, try it too.

Service center for Gigabyte: http://www.gigabyte.com/support-downloads/customer-service.aspx

Please, elaborate. What memo pad? Are you trying to connect by wireless too ?

Just get the driver from here: http://www.media-tech.eu/products/kamery-internetowe/MT4029B Good luck.

watch youtube for a sample how to replace laptop screen

YOU HAVE TO BE MOORE EXACT.

HAVE YOU FRONT WIRE CONNECTIONS PROBLEM ? http://www.pcityourself.com/building/frontPanelConnections.php

Check the cord connection between the dvd player and the computer. Re boot the computer and then plug the dvd player in. Be sure the dvd player is connected to the power source. You should "see" it on the computer as an icon if you are displaying the desk top If not, click on the desk top Windows icon, and then click on Computer when the pop up comes on. You should see the display of your computer and hard drives The dvd player icon should show up under "devices with removable storage" there. Re check the dvd is actually on. Click on Control Panel and then "Hardware and devices" You will see your printer etc. If the dvd player doesnt show up, try and open the dvd player to load in a disc. If the tray doesnt open, the player is defective If it does, then the fault is in the computer "Device Manager" Go to the computer Device Manager and you will see the device name with a red x against it. The two possible faults are 1. The driver is missing or damaged 2. The device is defective If you have the skilset, delete the dvd driver and install it again from the manufacturers (Toshiba?) web site If you dont, find a geeky friend!

1.TRY WITH A OTHER MONITOR. CHECK THE CABEL BETWEEN MONITOR AND COMPUTER SHOULD BE SCREWED TIGHT. CHECK SO THE VIDEOCARD IS TIGHT SEATED TO THE MOTHERBOARD. VIDEOCARD CAN BE BROOKEN. WITH THE INFORMATION GIVEN THIS IS A POSSIBILIETY MOORE INFORMATION WOOD BE GOOD.

Most computers use a CR2032 type 3 volt battery, but this can vary. The type is usually engraved on the top of the battery so you can check and note the type. ALWAYS disconnect from the mains when delving in the innards, and note that some battery retainers can be quite delicate. Make sure you get the polarity right as well.

This appears to an EliteGroup Computers (ECS) rather than Gigabyte motherboard. It is fitted to some Gateway computers and the following links should enable you to download the relevant drivers for installation when you choose your OS http://driverscollection.com/?H=C51PVGM-M%20(V1.0)&By=ECS%20(Elitegroup) http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=695&CategoryID=1&DetailName=Feature&MenuID=21&LanID=0#fragment-Download