20 Most Recent
Gigabyte GA-8IG1000MK Motherboard - Page 7 Questions & Answers
When i insert cd for
You might have downloaded the wrong driver version. Redownload it again using the automatic scan.
7/10/2014 1:22:04 AM •
Gigabyte...
•
Answered
on Jul 10, 2014
New GA-990AX-UD3 motherboard will not boot
Thomas,
I have had a Gigabyte mobo not boot due to a pushed pin on the 24-pin mobo connector. I fixed and it booted normally. In your case it seems to be the video card. Are you using the DVI or HDMI output. Use the DVI first to setup your card on a monitor not a TV. HDMI is notorious for not working on a new build. Also reseat your video card and be sure non of the pins on the board itself are pushed in, or stuck in the out position it can happen. Also be sure your card is in the top slot or the 16X slot for the first boot. The one closest to the CPU. This may help. -Devin
6/30/2014 2:33:58 AM •
Gigabyte...
•
Answered
on Jun 30, 2014
78lmt-s2p
are all the driver in and is there any power to board
6/24/2014 12:18:53 AM •
Gigabyte...
•
Answered
on Jun 24, 2014
My Dedicated Video Memory Is 64MB. How to i increase dedicated video memory.I Use gigabyte Motherboard
You need to alter the video memory setting in BIOS. You can get to this by tapping F2 or Del during the boot sequence and then finding the setting within BIOS. Bear in mind that the amount of dedicated memory can only be altered within certain limits. Some motherboards - you don't give a model number - don't support more than 64Mb, others support 1Gb, depending upon board and amount of memory installed
6/10/2014 9:21:22 AM •
Gigabyte...
•
Answered
on Jun 10, 2014
My system giving trouble display goes blank after 10 minuet
Check power settings by opening control panel -> power options. Check when is the computer set to go to sleep and when to turn of the display. This might be caused by Windows power settings that put the computer to sleep to save power.
6/4/2014 10:22:39 AM •
Gigabyte...
•
Answered
on Jun 04, 2014
Not finding what you are looking for?