20 Most Recent Canon PIXMA MG2120 - Multifunction printer / copier / - 5288B019 Questions & Answers

If your printer was not in use and out of ink for a long while, the nozzle that feeds the ink through maybe blocked, also check your leaflet of your product (trouble shooting it may give you some idea) if not.. contact the company where your product was manufactured for more information. hope these tips help!

If your printer was not in use and out of ink for a long while, the nozzle that feeds the ink through maybe blocked, also check your leaflet of your product (trouble shooting it may give you some idea) if not.. contact the company where your product was manufactured for more information. hope these tips help!

http://youtu.be/q5GyoePiy90 On Web > go to Canon.com and download driver disc. Plug in printer and follow instructions, see link above.

Please refer this page on canon website for possible reasons for error P02. http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg2120?CMD=MIXED_SEARCH&mName=PIXMA+MG2120&mType=PIXMA+MG&pageKeyCode=ekbresults&searchString=error+p02&BASIC_SEARCH_CURRENT_TOPIC_ID=2259&BASIC_SEARCH_CURRENT_TOPIC_TYPE=0&RESULTS=RELEVANCE&RELEVANCE_START=1&RELEVANCE_COUNT=25&CONFIGURATION=1011&PARTITION_ID=1&TIMEZONE_OFFSET=null&USERTYPE=1&isSecure=false I short video to attempt a fix is shown on this sitehttp://www.youtube.com/watch?v=JCMrI8HZPKw

Yes you can scan without ink, ink is for printer.

Yes

Did you use OEM ink or some other company?

You mentioned that you have already replaced the Laser Unit, but the error persists. Here are a few more steps you can try: Check the cable: Ensure that the cable connected to the Laser Scanner Unit is properly attached and not damaged. Replace the DC Controller PCB (PCB4): If the error still persists after checking the cable and replacing the Laser Scanner Unit, you might need to replace the DC Controller PCB (PCB4) Here are some YouTubes that may help - once you get past ads. Exciting New Discovery (youtube.com) How to fix error code E110 in Canon ImageRunner Cantina IR 2520 2525 2530 #canon #subscribe (youtube.com)

You can download the Canon printer drivers from their support WEB site. Please click on this link and select your model printer to download : - http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct

If your Canon iPF605 printer won't enter service mode and gets stuck at the "S" symbol without initializing, it may indicate a firmware or hardware issue. Consider updating the firmware or contacting Canon support for further assistance.

They make a few, mains, battery, solar, solar with battery. https://www.google.com/search?q=Canon+Calculator Disconnect power for 30 minutes to reset it. Generic Canon Errors https://www.google.com/search?q=Canon+Calculator+error+message ..