Motorola Mobility HS850 Consumer Headset - Answered Questions & Fixed issues

0000 Mark Motorola Support

Contact your PC manufacturer. They probably have drivers for your hardware and OS. Mark Motorola Support

Hi,

The pairing PIN code should be 4 zeros: 0000

Repairing is fine.

To pair the bluetooth headset with your iPhone. Switch on the headset. Then in the iPhone goto settings then bluetooth you can see the iPhone is searching for devices. If it sees your HS850, just click on it and when asked to enter a pin, give in 0000. Once the iPhone knows your device, I should find it every time both are switched on. (Bluetooth must be switched on on the iPhone)

Make sure you are selecting Headset and not music.

open the boom (mic) right when it turns to solid blue!
http://www.motorola.com/consumer/v/index.jsp?vgnextoid=4507f7c0c1a0b010VgnVCM1000008206b00aRCRD&ps=y&pg=PG_TYP_00003&show=globalSupport&productID=e4e6e7af976c9010VgnVCM1000008206b00aRCRD

How to place a Motorola HS 850 bluetooth headset into paring mode:

1. Close the boom to turn the unit off.
2. Hold down the call button until the blue light comes on.
3. While holding down the call button, swing the boom open.
4. (Now you can let go of the call button.)

The headset is now in pairing mode, and you can search for it using your phone. When it asks for a PIN, use 0000.

Hi Jeanie:How to place a Motorola HS 850 bluetooth headset into paring mode: Close the boom to turn the unit off. Hold down the call button until the blue light comes on. While holding down the call button, swing the boom open. (Now you can let go of the call button.)The headset is now in pairing mode, and you can search for it using your phone. When it asks for a PIN, use 0000.Hope helps. Your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.Thank you for using Fixya, and have a nice day.

Hold down the answer call button on the bluetooth headset until the light is solid (not flashing). When the PS3 detects your headset, it'll ask for a pass. The pass should be "0000" (four zeros).Hope this helps.

Firstly, make sure you have enabled Bluetooth on your phone or whatever device your using the headset with. The default setting off, so go into your phones set menu and enabled Bluetooth.
You'll then need to 'pair' the headset and phone.
1. Ensure the headset is turned off (indicator light not blinking).
2. Press and hold the Call E button for 4 or 5 seconds. The indicator light will initially flash, but continue to hold down the button until the indicator light is steadily lit.
If the indicator light is flashing or not steadily lit when releasing the button, repeat both steps 1 and 2. Hold the Call E button for 4 or 5 seconds.
3. Enable Bluetooth on your phone and get to 'search for devices' it should find the headset.
4. Select Motorola HS850
Select OK or Yes to pair your headset with your phone. Enter the passkey: 0000 Select OK. When your headset successfully pairs with your phone, the indicator light changes from steadily lit to flashing.
Hope this helps. Oh and make sure your phone actually supports the headset!

Turn on BT on the iPhone. From the home screen: Settings > General > Bluetooth. Setup the headset to be discoverable (push and hold the button on the HS700 until the ring turns blue. Extend the boom mic. I believe you do the same on the HS850.) iPhone finds the headset. Enter the code for the headset. Mine was 0000. I believe that's universal for Motorola BT headsets

Hope this was helpful

Positive Feedback ALWAYS Appreciated :)

send it back to motorola

Hi,to complete the look of a tech-savvy, iPhone-using individual, you must have a Bluetooth headset to accompany it. You can pair any Bluetooth headset with an iPhone. The Motorola HS850 is no exception to this. Both Motorola and Apple's Bluetooth set-up process is fast, so you'll be talking with people through your new Bluetooth on your iPhone in a matter of minutes.

Instructions

Charge the Motorola HS850 headset fully before attempting to pair. Usually, it takes two to three hours to charge the headset.

Press and hold the "Call" button (has a phone icon on it) on the headset for six to 10 seconds. The outside LED light will turn on indicating that the phone is in pairing mode.

Choose "Settings" on the iPhone homescreen.

Select "General," then "Bluetooth."

Select to turn Bluetooth on.

Wait for the phone to search for in-range devices.

Select theMotorola HS850 from the list of devices.

Enter the headset passkey to complete the pairing. By default this is "0000."

Have a nice day..

I bought one here - I'll let you know if it works

https://www.eglobalwireless.com/p-3052-motorola-hs850-replacement-ear-hook.aspx

The passkey is 0000 and cannot be changed, did you follow the correct procedure ?

To place a Motorola HS 850 bluetooth headset into paring mode:

1. Close the boom to turn the unit off.
2. Hold down the call button until the blue light comes on.
3. While holding down the call button, swing the boom open.
4. (Now you can let go of the call button.)

The headset is now in pairing mode, and you can search for it using your phone.
When it asks for a PIN, use 0000.

is on the Motorola webpage.
check there

http://www.motorola.com/staticfiles/Support/Mobile%20Phones%20Accessories/HS850/US-EN/_Documents/Static%20Files/HS850_UG.pdf

was soooo helpful just make sure u do flip it open immediately after, thats were i messed up... Thk

if you still have a warnty on it you should problaby return it for a new one and if that doesnt help. ill find another solution for u

thanks for what dear have anybody give you a good solution for your problem