20 Most Recent Motorola Mobility HS850 Consumer Headset - Page 5 Questions & Answers

you want it to get hooked up with the ps3? go to the blue tooth management setting then hold down the power button of your blue tooth until it starts blinking colors, most likely red and blue, then start the scan, after that you should be good, the code for the blue tooth is usually 0000

close the boom to keep it off. hold the button, open the boom (mic) right when it turns to solid blue, done!
http://www.motorola.com/consumer/v/index.jsp?vgnextoid=4507f7c0c1a0b010VgnVCM1000008206b00aRCRD&ps=y&pg=PG_TYP_00003&show=globalSupport&productID=e4e6e7af976c9010VgnVCM1000008206b00aRCRD

go to the sync option in your phone and turn bluetooth or headset on and then if its a bluetooth hold all the buttons on it downuntil it beeps or lights up

0000

First fully charge bluetooth.close bluetooth flip/turn on power by press button in the midle and open flip look blue light not flashing ok for pairing.if not do again and again,pairing only light stay on no flashing.
In phone go to bluetooth function/bluetooth turn on/searching devider ok/enter 4 zero ok.sucessful for pairing.

The default passcode is 0000 (four zero's).

more than likely its 0000 until you change it but it should be in the instructions with it.

You need to check the settings then .....

Message > Menu > Message Setup. Fill in the required and you should be away.

Master Clear and Master Rest get rid of all your pictures, ringtones, videos and address book
so beware of this !

I found advice from another of your customers which said to press the button on the back of the bluetooth for about 6 seconds until the blue light went solid and then immediately open the mike boom on the bluetooth and press the button on the phone to add a new device. The phone then came up with the model number of the bluetooth which I accepted.
Job done

Two ways, you can call your cell phone carrier they usually have a list. Or you can contact motorola directly and they will give it to you.

close the boom mic , press the button and hold until blue light is solid and with your spare hand flip the boom mic back open and the light should remain on. "0000" is the default passkey

IT MIGHT BE THAT YOU CAN ONLY USE A CERTAING HEADSET WITH THEM I HAD PROBLEM WITH IPHONE THERE WERE CERTAIN ONES YOU HAD TO USE

Hold the phone button on the headset until the light comes on and the head set beeps. When this happens start the discovery process on your cell phone. When the device is discovered it will ask you for the pass code to pair the headset. I can't remember if it is 99999 or 00000 check with motorola or the paperwork that came with the headset.

ronjim,

My son was in a car accident two years ago and he is now quadriplegic. He also was not able to use a cell phone or a Bluetooth Headset...because he could not push a button. I eventually decided to figure out a way to help him and spent countless hours and broke several headsets...but I finally figured out a way to modify a Bluetooth Headset so that it is triggered by a magnet instead of having to push a button. I mounted a magnet next to the headrest on his wheelchair so when my son wants to make a phone call he simply has to move his head so the Bluetooth Ear Piece passes close to the magnet. I put a magnet in his pillow so he can do the same thing when he is in bed.

I decided to setup a Website and sell them..check it out [ http://www.nobuttonsheadset.com/ ]. There is a lot more information on the site. I know this headset can help a lot of people (once word gets around that it is available). Hopefully I can also make a few bucks to help support my son.

There is an email address in the "Contact" pages of the Website. Once you have had a chance to look at it...please let me know what you think.

Thanks!

Darrell Huff

EASY, go into your settings, connections and then bluetooth, if I am cot mistaken it will ask you for a password, it should be all zeros..once in bluetooth select add new device type in your unit like: motorola H680, thats what I use...thx STeve

the code is 0000

0000

The light is supposed to go off when fully charged.
With the boom closed, press & hold the main button until the blue light comes on (about 3 seconds) then release the button & open the boom. The light stays on, and the bluetooth is now in "pairing" mode. Search for it with your phone. The password is 0000 (zeros).

http://www.motorola.com/mdirect/manuals/HS850_%209489A97O.pdf

You can mute outgoing voice during a call by tapping on both volume buttons and tap them again to un-mute.possible you are experiencing this . i did