Nortel LG-IP Phone 8830 VoIP phone - Page 2 - Answered Questions & Fixed issues


Try here: bcm50.com

Nortel Lands... | Answered on Feb 04, 2016 | 73 views


BCM 50, maybe? bcm50.com

Nortel Lands... | Answered on Feb 04, 2016 | 61 views


This is usually programmed as one of the 'soft' buttons down the right hand side of the device - subject to the programming of your phone / and the system.

Usually the T7208 is connected to the BCM range of PBX systems - in which case, to transfer a call, you'd use Feature 70. You could, of course, program this into one of the buttons yourself, so you only have to press one button to do so.

Hope this is of use to you. :)

Nortel Lands... | Answered on Oct 06, 2015 | 411 views


google m7324 user card, you can also google norstar feature codes.

Nortel Lands... | Answered on Aug 20, 2015 | 121 views


If the phone doesn't ring when called by the extension number of the phone then try to use the volume up button while someone is calling the phone. The volume is a multi-purpose button that doubles for phone volume and ringer volume. However, the only way to turn up the ringer is when a call is coming into the phone.

Nortel Lands... | Answered on Jul 09, 2015 | 376 views


Need more info.

Nortel Lands... | Answered on Jul 09, 2015 | 61 views


If the display also goes off during the time of all the lights flashing on and off it sounds like you have a bad phone and it will need to be replaced. Try a different phone to see if you still experience the same issue.

Nortel Lands... | Answered on May 15, 2016 | 160 views


F983 and F985 are voice mail access feature codes. Try rebooting your voice mail system to see if the unit recovers. There is no switch so you will need to unplug the power to the VMS to reboot.

Nortel Lands... | Answered on Jul 09, 2015 | 262 views


The set you called is forwarded to voice mail, but the phone doesn't have a mailbox.

Nortel Lands... | Answered on Jul 01, 2015 | 57 views


In system programming, you can select whether the display is the name, number, or line.

F**CONFIG
Terminals&Sets
enter extension #
skip Line Access, Capabilities, Name, User Preferences
Telco Features
skip Feature Assign
at 1StDisplay use CHANGE softkey to toggle to NAME.

Nortel Lands... | Answered on Feb 02, 2015 | 2,140 views


Try Feature 65, then RLS

Nortel Lands... | Answered on Feb 02, 2015 | 45 views


Check that the handset is plugged in correctly (some phones have a jack for a headset as well as handset.
Try another handset.
Try another handset cord (cords are a failure point).
Make sure the cradle switch is not stuck down.

Nortel Lands... | Answered on Feb 02, 2015 | 75 views


You need to enter the "Make Set Busy Deactivate Flexible Feature Code" - the "Flexible" part meaning the system administrator can change it, so you'll have to ask. The default appears to be #62.

Nortel Lands... | Answered on Feb 02, 2015 | 216 views


Not to be too obvious, but did you mean Feature*98?
Even then, it should be F*981, or another in that group:

Voicemail Feature Codes Norstar Meridian and Nortel BCM Help Guides

Nortel Lands... | Answered on Feb 02, 2015 | 103 views


Have you resolved this yet? If your CO connection is analog, it's done by your telco. If you have a PRI (T1), then it's in your system's configuration.

Nortel Lands... | Answered on Feb 02, 2015 | 75 views


Basically, you want to disable Forward No Answer to voicemail:

Feature ** CONFIG
Terminals&Sets
enter ext #
advance past Line Access to Capabilities
go to Fwd No Answer
CHANGE softkey to None
go to Fwd On Busy
CHANGE softkey to None

Nortel Lands... | Answered on Feb 02, 2015 | 87 views


The phone doesn't have any message capability - it is the central system (KSU) behind it, which can be one of several types. Generally, F981 will get you into the voicemail system, 0000 is the default password, else you will need to know the existing password for that extension, then follow the prompts (8=admin).

Nortel Lands... | Answered on Feb 02, 2015 | 84 views


That feature code is documented as
Feature 985 Norstar Voice Mail Directory Number which should give you the number, not reset anything. You can hang up (RLS) then dial it.
Initializing a mailbox (if that's what you're trying to do) is F981, option 8 (admin).

Nortel Lands... | Answered on Feb 02, 2015 | 51 views

Not finding what you are looking for?
Nortel LG-IP Phone 8830 VoIP phone Logo

5 questions posted

Ask a Question

Usually answered in minutes!

Top Nortel Lands Phones Experts

martin hogg

Level 2 Expert

157 Answers

pbxinc

Level 2 Expert

64 Answers

Sanjaya Sahu
Sanjaya Sahu

Level 2 Expert

101 Answers

Are you a Nortel Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...