20 Most Recent Actiontec GT704WG Wireless Router (gs583ad3-01) - Page 7 Questions & Answers

Sorry, but this router only accepts 802.11b & 802.11g connections only.

Actiontec... | Answered on Mar 11, 2010

Are you looking for the wireless password or the password of the router?
If you want the password of the router, then try the default password of the router. If the default password doesn't work then you will need to reset the router and reconfigure the router.
If you are looking for the wireless network password, then you will need to open the set up page of the router. Is there any computer connected to the router ? If not then you will need to connect the computer to the router. Or any other computer which is able to go online using the router. Check the IP address on that computer. open the set up page of the router. Set up page of the router is the page where you will find all the settings of the router. under the wireless section you will find the wireless network password
Click here for more information about the routers and wireless network

Actiontec... | Answered on Mar 07, 2010

Reset the router,and re-set it up again. manual to do all this below. Download and follow instructions, after reset.

Actiontec... | Answered on Mar 06, 2010

if your router have DHCP enabled plug an connect your network card into your router.

when you see that it gives you an ip address just type in command prompt: ipconfig /all and at Gateway you will see your router address

Actiontec... | Answered on Mar 05, 2010

You need to delete your cookies cache...

Actiontec... | Answered on Mar 05, 2010

look for the security key on the label thats on the bottom panel of the router....else you can also login to the router and create one by your self....

Actiontec... | Answered on Mar 03, 2010


PLease find yourself a free copy of the manual by clicking on the link below:

You can also find useful other instruction by going to:

Actiontec... | Answered on Mar 02, 2010

Have you tried to download updated firmware or drivers? Maybe a reset, and reinstulation? With out knowing what kind of router it is hard to help you with which site to go to. I would visit the support page of the manufacturer. Good luck.

Actiontec... | Answered on Feb 23, 2010

If you can access the internet it is not a problem with the router. Are you able to access the PSN site but rejected when you enter your credentials?

Actiontec... | Answered on Feb 04, 2010

the router should have the imput voltages etc printed on the bottom. If they match there is no objection.

Actiontec... | Answered on Feb 01, 2010

Your router's wireless configuration has been changed ie SSID, WPA encryption etc. and therefore the wireless card in your computer needs to be changed as well so it can connect to the wireless router. Please click on this link for my instructions to secure the wireless network, configure the wireless router and the wireless in the computer :-

Actiontec... | Answered on Jan 29, 2010

Sounds like you have to boost the range on your router.

There is a setting in it that will define the range your router will reach.

Actiontec... | Answered on Jan 18, 2010

Upnp usually activates when a device is attached to the computer.
To manually do this, you can go to the "Device Manager", (Presuming you are using Windows 98 or later) and right click any device in the list and select the menu item to "Scan for Hardware Changes". This starts the Operating System Plug and Play discovery and the "New Harware Found" dialogue box should pop up.
If it dosn't, look in the list to see if your device is there already. If it is, right clik it and select uninstall, then redo the "Scan for Hardware changes" again to see it come back.

Also, be shure it's powered up and connected properly if nothing seems to be working here.

Good Luck.

Actiontec... | Answered on Jan 18, 2010

Place your modem in bridged mode First and then try connecting the Router.
Ensure that all the settings for the wireless are entered correct.
Check the SSID and Security Mode and configure properly

Actiontec... | Answered on Jan 16, 2010

Power light being RED indicates that the Router has gone bad.
Try to push and hold the reset button for a minute and check if it works.
Else time to change the router

Actiontec... | Answered on Jan 16, 2010

I went to Best Buy and asked the support staff.THEY WERE VERY HELPFUL.I ended up buying a NetGear router on sale for $40.00 as the Verizon router does not have a ethernet outlet to the computer so it is not able to be used.

Actiontec... | Answered on Jan 15, 2010

yes you can access actiontec GT704WG wirelessly with your macbook pro

Actiontec... | Answered on Jan 14, 2010

Do you have a Windows computer that is able to connect to your wifi router? If so, then download WirelessKeyView (link is to CNet's download service so it's a trustworthy program)

Run that on your Windows computer, and then type the wifi key into your iPod touch.

Actiontec... | Answered on Jan 09, 2010

Not finding what you are looking for?
Actiontec GT704WG Wireless Router (gs583ad3-01) Logo

330 questions posted

Ask a Question

Usually answered in minutes!

Top Actiontec Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers


Level 3 Expert

13434 Answers


Level 3 Expert

8597 Answers

Are you an Actiontec Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Actiontec Computers & Internet

  • Actiontec Computers & Internet

Most Popular Question

error virtual server add error failed

  • Computers & Internet