20 Most Recent
Intel Motherboard - Page 8 Questions & Answers
Mother board does not boot
actually tell us what and how is the beep coming and what is actual problem. is the pc starting or not or the display is coming or not
Thank u
Regards
Anand patil
Hyd
2/1/2014 9:38:05 AM •
Intel...
•
Answered
on Feb 01, 2014
Motherboard will power for only a split of a second
The problem maybe the RAM, it is faulty or just needs reseating to make proper electrical contact. Reseat the RAM and then boot up your laptop. If it still does not boot up then remove the RAM module/s and take them to your friendly computer repair shop and get them to test the RAM for you. Just like you sometimes need a mechanic to repair your car, sometimes you do need a technician to diagnose and identify the fault or faults on your computer. Not only does a good service technican have the experience to deal with this type of problem, they also have the equipment that allows them to look at things the average computer user can't see, and he has a collection of replacement parts that can be used to quickly test individual components on your computer.
1/25/2014 8:27:22 AM •
Intel...
•
Answered
on Jan 25, 2014
Msi p35 neo2
take off all the stuff from the mobo except the processor, a stick of ram and the graphics card - will it get further now?
1/15/2014 2:59:13 PM •
Intel...
•
Answered
on Jan 15, 2014
How to connect the front panel usb port and mic to
Your motherboard manual will show you what headers to plug them into.
If you dont have the manual, download one from your manufacturers support page.
If you have problems finding your manual, write back with your make and model
1/14/2014 4:38:54 PM •
Intel...
•
Answered
on Jan 14, 2014
Want a bios file
I can help you in this matter
i have a file d845gvsr.bin 512kb
1/9/2014 7:55:41 AM •
Intel...
•
Answered
on Jan 09, 2014
Sata cable & pata cable have a any jumper setting
Hi,
The hard drive / optical drive have jumper settings, not the motherboard. PATA has jumper settings, but SATA do not require any. The diagram of the setting is drawn on the hard disk itself below the serial number etc. For SATA, look on the motherboard for the SATA ports. Each port will be named as like SATA 0, SATA 1 etc. If you want the hardd disk to boot first, plug it in SATA 0. and the next device in SATA 1. However, you can also set the first and other boot device from the BIOS itself, in case of SATA.
12/27/2013 4:00:43 PM •
Intel...
•
Answered
on Dec 27, 2013
Computer will not boot
The code A6 indicates bad memory. If it is new take it back or replaced under warranty.Most memory manufacturers have a lifetime warranty.
If it came with the new computer, take the whole computer back and get it replaced under warranty.
Please let me know how you make out.
thanks
12/24/2013 7:38:41 PM •
Intel...
•
Answered
on Dec 24, 2013
Not finding what you are looking for?