Kodak i160 Path-Through Scanner - Answered Questions & Fixed issues
Where is the serial number for the i4200 scanner
The Printer access cover which is right under the output tray - lift this cover to access the feed module release
knob and the optional Enhanced Printer for changing printer positions
and maintenance. The scanner serial number and K number are also
located in this area. ---> All of this is located in the User Manual, FYI.
4/15/2014 9:29:11 PM •
Kodak i160...
•
Answered
on Apr 15, 2014
•
2,086 views
Install twain driver
If you are using windows 7 and it doesn't support your scanner get a program called Vue Scan, it works with nearly all scanners and it will save you buying a new one. it is available quite easily just google it
2/23/2016 11:00:58 AM •
Kodak i160...
•
Answered
on Feb 23, 2016
•
192 views
Several pages are feed at time
Depending on the usage of the scanner, you can try cleaning first. Kodak recommends rollers be replaced every 125,000 scans.
1. Open the scanner and use compressed air to gently clean the rollers. If that does not help, use cotton swabs with alcohol to clean off any residue left on the rollers.
2. Replace the rollers. Part numbers can be found here:
parts
You can order the replacement parts directly from Kodak:
1-800-822-1414 (8AM - 8PM ET)
Happy Scanning,
Myridom
3/5/2011 2:24:07 AM •
Kodak i160...
•
Answered
on Mar 05, 2011
•
149 views
Scanner not working
Adaptor rating should be 5.25amp 240volt
ITE or Phihong brand are normally used on this unit.
Main board drawing to much current.
check for staple contamination inside scanner.
6/10/2009 10:12:32 PM •
Kodak i160...
•
Answered
on Jun 10, 2009
•
206 views
My kodak verite 55 printer says it is out of paper, but it is not. It also says the printer is not recognized. Any ideas?
- Check to make sure that the paper tray is loaded correctly and that the paper is not jammed in the printer.
- Make sure that the paper guides in the tray are adjusted correctly for the size of paper you are using.
- Check to see if the printer driver is up to date. Outdated printer drivers may cause the printer to not be recognized by the computer. You can download the latest driver from the Kodak website.
- Check the USB cable that connects the printer to the computer to ensure that it is properly connected and that there is no damage to the cable.
- Restart the printer and the computer and try to print again.
- If the issue persist, run the printer troubleshooter, it might help you to identify and fix the problem.
- If none of the above solutions work, it is possible that the printer's paper sensor is malfunctioning. In this case, contact Kodak customer service for further assistance.
It's important to follow the instructions carefully and if you have any doubts or difficulties, consult the printer's user manual or contact the manufacturer for assistance.
1/24/2023 7:31:57 AM •
Kodak Office...
•
Answered
on Jan 24, 2023
•
38 views
My Kodak Ektapro 5020 double plays every slide
Hi,
if you need to purchase a special slide, you can call Kodak directly and make the request. They can either direct you to the product on their website or one of their vendors. And for the double slide issue, I would suggest leaving a blank space between each slide as a round about solution. Otherwise, you can reference the product manual to help overcome this.
Thank you.
11/26/2022 3:21:04 AM •
Kodak Office...
•
Answered
on Nov 26, 2022
•
32 views
Not finding what you are looking for?