20 Most Recent Lexmark X7170 All-In-One InkJet Printer - Page 3 Questions & Answers

If you have the Lexmark X7100 Series installation disc that came with your printer, just insert it into your computer's hard drive and simply follow the instructions on your computer screen.
You can also download and install the printer driver by visiting the Lexmark website at http://bit.ly/fWPweq. Select your operating system > click on FILTER > click on the printer driver under Recommended Downloads > download and execute the file. Simply follow the instructions on your computer screen.
You may also refer to the Lexmark X7100 Series User's Guide on how to setup the printer and steps on how use the printer's functions and features.

The 1203 error indicates either a communication failure between one of your cartridges and your printer or a short in one of the cartridges. Please follow the steps below to fix the problem:

1. Power off the AIO and remove the power supply from the back of the unit. Wait 30 seconds, then reinsert the power supply, and power the AIO on. Did the error message return?

Yes: Continue to step 2.
No: Print a test page. If the test page prints, the error is resolved.

2. Power off the AIO and remove the power supply from the back of the unit. Open the top cover of the AIO. Using the carrier belt, gently move the cartridge carrier to the middle of the unit.

3. Remove both cartridges from the AIO. Close the top cover, reinsert the power supply, and power the AIO on. Did the error message return?

Yes: There is a hardware problem with the printer. Continue to Contacting Lexmark.
No: Continue to Step 4.

4. Power off the AIO and remove the power supply from the back of the unit. Open the top cover of the AIO. Using the carrier belt, gently move the cartridge carrier to the middle of the unit.

5. Insert the color cartridge. Close the top cover, reinsert the power supply, and power the AIO on. Did the error message return?

Yes: Continue to Cleaning the Cartridge Contacts, and then repeat steps 4 and 5 of this procedure. If you have already tried cleaning the contacts, continue to Defective Cartridge Test.
No: Continue to step 6.

6. Power off the AIO and remove the power supply from the back of the unit. Open the top cover of the AIO. Using the carrier belt, gently move the cartridge carrier to the middle of the unit.

7. Insert the black/photo cartridge. Close the top cover, reinsert the power supply, and power the AIO on. Did the error message return?

Yes: Continue to Cleaning the Cartridge Contacts, then repeat steps 6 and 7. If you have already tried cleaning the contacts, continue to Defective Cartridge Test.
No: Print a test page. If the test page prints, the error is resolved.

Cleaning the Cartridge Contacts

1. Power off the AIO and remove the power supply from the back of the unit. Open the top cover of the AIO. Using the carrier belt, gently move the cartridge carrier to the middle of the unit.

2. Remove the cartridges. Clean the cartridge contacts (How to Clean the Print Cartridge Nozzles and Contacts Manually).

Source: 1203 Error Message on the Lexmark X7170 All-In-One

The 1203 error indicates either a communication problem between your cartridges and the printer or a short in one of your cartridges. Please follow the steps below to identify and fix this issue:

1. Make sure the printer is on.

2. Open the printer cover. The print cartridge carrier moves and stops at the loading position, unless the All-in-One is busy.

Note: If the carrier does not automatically move to the center, turn off the printer/unplug the printer from the power source and then slide the carrier to the center.

3. Remove both cartridges from the carrier.

4. Close the printer cover.

5. Re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds.

6. When the printer turns on, reinsert one cartridge first.

7. Close the printer cover and check for any errors.

8. If no error appears, reinsert the other cartridge. Close the printer cover.

9. Replace whichever cartridge is causing the error to appear with a new cartridge.

If problem continues, please contact Lexmark Technical Support Center for additional assistance.

In this case Try to Do a Wia scan i will tell u how..........
Windows Vista: Go to Start/All Programmes/Windows Photo Gallery...........
There you will see an option saying File click on that and now on the drop down click on Import from Scanner or Camera.........Select ur scanner from that list and click on Import.............
If it doesnt scan and does the same thing it insists that there should be a Problem with the scanner.........
If that works..........
Software Problem.............
Uninstall and Reinstall the software................

Good Luck..................

Lift the Flat Bed Scanner up so that you can find the Cartridges Inside.Remove the Cartridges from the Printer.Move the Cartridge Carrier Back and Forth as fast as you can!Replace the Cartridges back to the Printer!Good Luck!!!!

See if you have anything stuck inside the Printer!!!!Turn the Printer Upside down and Gently Shake it!!!!Good Luck!!!!!

Lift the Flat Bed Scanner and Turn the Printer Upside down and Gently Shake it!!!!!You May get something falling out of the Printer which might have been stuck there!Good Luck!!!!!

A technique to improve print quality is to try and clean the cartridge nozzles. You may clean the cartridge by following the steps given below: 1. Go to the "Lexmark solution center." This can be done by clicking on "Start," go to "Programs" and Lexmark printer group. Click on the "Lexmark Solution center." Next click on the "Maintenance" Tab. 2. Select "Clean and Fix Horizontal streaks." Click on "Print". This will produce a printed page. The colors that you should see here are black, yellow, magenta (a reddish purple) and cyan (a dark sky blue). You should notice the diagonal lines above and below the solid horizontal lines. These diagonal lines should be solid from left to right with no gaps. If there are gaps in the lines or the print diminishes across the page, you should run the "Clean Print Nozzle" page a couple more times to try and clear it up. If you still have gaps at the top and bottom, you should "wick" the cartridges by following the steps given below: 1. Please open the "Solution center" again and go to the "Maintenance" Tab. 2. Select "Install color/black cartridge" and remove the cartridge or cartridges from the printer. 3. Get a damp paper towel. 4. Set the ink cartridge right side up on the damp paper towel so that the ink nozzles are against the towel and hold the cartridge in this position for about 15 seconds. 5. Now wipe the print head (on the bottom where the ink comes out) across in one direction only (left to right) until it looks clean. 6. Next dab the cartridge on the towel to make sure that the ink is flowing. 7. Snap the cartridges back into the printer. 8. On your computer, select "Old Cartridge install." 9. Repeat the "Clean Nozzle Page" one more time. If this fails to address the problem the entire procedure may need repeating.Good Luck!!!!

What is the Exact Error Message you get while you try to Print Out!!!!!Whats the Operating System on this Computer?

Please remove the cartridges from the printer. Take a dry lint free paper towel and gently wipe the contacts on the back of the cartridge (not the bottom from where ink is present). Wipe the contacts inside the printer (on cartridge carrier). Please snap the cartridges back into the cartridge carrier and please try to print a printer self test.Make Sure you Insert the Cartridges in the Right Slot!Good Luck!!!!

Please remove the cartridges from the printer. Take a dry lint free paper towel and gently wipe the contacts on the back of the cartridge (not the bottom from where ink is present). Wipe the contacts inside the printer (on cartridge carrier). Please snap the cartridges back into the cartridge carrier and please try to print a printer self test.Make Sure you have Inserted the Right Cartridges in the Right Place!Good Luck!

Even though the Mode is on Copy on the Printer it would still print if you send a Job from the Computer!Since When are you facing this trouble?Whats the Operating System on this Computer?

Remove the Cartridges from the Printer....On the Backside of the Cartridge you would find a Copper Stripe!!!!Take a Paper Towel and Wipe that Copper Ends on the Cartridge!!!!Reinsert the Cartridge and Restart the Printer!!!!!!Good Luck!!!!!!!

In most cases the printer driver software can have errors while being in use or is shut down. So to reset remove your printer from the PC and uninstall the printer software. Now reinstall the printer software and then connect the Printer to be detected as a new hardware as it will be installed. Now check the printer properties to see the ink levels.
Activate head cleaning before a test is taken . Sometimes it is possible that the head is not reacting to the need of the PC command or can be an issue with ink drying or poor ink cartridge contacts. Sometimes the power supply unit must be checked as a poor SMPS unit can deliver low voltage and cause issues to the printer function. Check all the leads and connections of the mother board , the tags to the ink cartridge. Also check the mechanical settings of the ink cartridge , if jammed or tight remove motor and manually free the drive before it is set back.

Thank you for using FIxya

The Lexmark 7100 Series User's Guide will give you a more comprehensive guide on how to load your ink cartridges in your printer.

Please contact Lexmark Technical Support Center for additional assistance.

Try this approach instead:

1. From the printer operator panel, press Setup button > and then press Ok.
2. Press the up or down arrow button until Clean Cartridges is highlighted, and then press OK.
3. Press OK again. A page prints, forcing ink through the print cartridge nozzles to clean them.
4. Print the document again to verify that the print quality has improved.

If that doesn't help, please contact Lexmark Technical Support Center for additional assistance.

You can visit the Lexmark website to download and install the Lexmark X7170 Printer Driver. Select your operating system, download and execute the file. The software also shows a comprehensive guide/instructions on how to setup the printer itself.
You may also refer to the Lexmark X7170 User's Guide available on the Lexmark website.

Please visit the Lexmark website to download and install the Lexmark X7170 Printer Driver on your computer. Select your operating system, download and execute the file. Please follow the instructions on your computer screen.

Make sure you are inserting genuine Lexmark cartridges. If you are, please contact Lexmark Technical Support Center for assistance.