20 Most Recent Belkin (F5D7231-4) Wireless Router - Page 5 Questions & Answers

0helpful
1answer

It stops working every 5
Update the firmware, reset it to factory defaults.

http://en-us-support.belkin.com/app/product/list/q/routers/

Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response.

Thanks, Joe I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Read full answer
11/20/2010 5:05:48 AM • Belkin... • Answered on Nov 20, 2010
0helpful
1answer

I have connected my wlan
Connecting to the Internet using a router
  1. Choose a convenient location to begin installing your router, such as an open floor space or table. This does not need to be the permanent location of the router. For wireless routers, it may be necessary to re-position the unit after installing it as the signals may not reach all areas needed.
  2. Unplug the power to your Internet modem.
  3. Power down your computer(s).
  4. Plug the power in to your router.
  5. Connect your Internet modem to the router. The cable plugs into the router jack named "WAN" or "Internet". Turn on your Modem.
  6. Connect one computer to the router. Even if the router is a wireless model, connect this first computer to the router via a network cable.
    router_back_lan.jpg

  7. Turn on the computer.
  8. From the computer connected to the router, open your web browser. Enter the router's address, http://192.168.2.1, and press Enter on your keyboard.
  9. Click Login in the upper right-hand corner of the page. The router does not ship with a password, so just click Submit.
    login.jpg
  10. To configure the router to connect to the Internet, you must enter information provided by your Internet Service Provider (ISP) into the "Connection Type" section in the left-hand column under the "Internet WAN" heading of the router's configuration page. If using DSL Internet, you may need to enter the PPPoE username and password. Likewise, if you have been issued a static IP address by your provider, the static IP fields (including network mask and gateway) must also must be set in the router.
    wan_conn_type_dyn.jpg
  11. If this is a wireless router, change the network name (referred to as SSID). While the router comes to you with a network name set at the factory, you may want to use something more familiar for your network. Read Changing the router's wireless channel and SSID for a description of this process.
  12. Plug the power back into your Internet modem.
  13. Verify that this computer can connect to the Internet properly. Open a new web browser and visit a few Internet sites such as Google.com or Yahoo.com.
  14. Finally, configure additional network security features as desired to guard your systems against Internet attackers.
If you need more help come back.Post / thumbs / testimonial are welcome!
Read full answer
11/19/2010 12:27:28 PM • Belkin... • Answered on Nov 19, 2010
0helpful
1answer

Roter locked and can't access my internet , how do
To restore the router to factory default settings, please do the following:
1. Unplug the router's power supply
2. Press and hold the reset button on the bottom of the router
3. Keep the reset button depressed and, at the same time, plug the power supply back in
4. Keep the reset button depressed for another 10 seconds
5. Release the reset button

If you need more help come back.Post / thumbs / testimonial are welcome!
Read full answer
11/12/2010 11:49:39 PM • Belkin... • Answered on Nov 12, 2010
0helpful
1answer

My son is trying to
Hi,

This Utility program will help you locate few details of your network like,

1. SSID ( network name )
2. WEP/WPA Key ( Your network security key )
3. The PC/Laptop IP Address
4. Router IP address
5. Which all Devices are connected to your Router/Network Wireless
6. Which all Network are available nearby your place
7. Let you access the Router Configuration

Click here to Download the HP Network Diagnostic Utility

Download the file on Desktop and Run the program ( Ex. File name = HPNDU.EXE )
Follow the Instructions on the Screen and do accordingly.

Hope this is helpful.

* Rating and comments are welcome on this solution
Read full answer
11/11/2010 10:06:43 PM • Belkin... • Answered on Nov 11, 2010
0helpful
1answer

Trying to type 192.168.2.1 into
This address is the 'default' factory setting for the router, howeveryour router may have been changed from the default.

To check this you will need to do the following:
  1. Click on Start, and then Run
  2. in the box that appears, type CMD (make sure nothing else is in the box) and press Enter
  3. this will bring up a prompt that should end in :\>
  4. type ipconfig and press Enter
This will bring up a list of interfaces and their IP addreses as well as default gateway information. If your router has been changed from the default, the IP address of the gateway will be something other than 192.168.2.1. If it is not, make a note of this address, and enter this in to the Internet Explorer browser, and you should come up with the Belkin configuration page.

Hope that this helps!
Read full answer
11/8/2010 7:09:22 PM • Belkin... • Answered on Nov 08, 2010
0answers

This router is stressing me
Read full answer
Be the first to answer 11/7/2010 1:20:06 AM • Belkin... • Posted on Nov 07, 2010 • Be the first to answer
0helpful
1answer

In the last couple of weeks, I loose my connection
Go Belkin : Support : Setup Assistant for Routersand start a new configuration.
Read full answer
11/4/2010 12:51:21 AM • Belkin... • Answered on Nov 04, 2010
0helpful
1answer

My ipod touch was able to connect to my home
Hi advise you to reconfigure your wireless security mode and disable Firewall

change SSID to a different name and a new password
change the security mode to 64bit WEP.

Good luck. please rate me Techbelkin
Read full answer
11/2/2010 12:06:59 AM • Belkin... • Answered on Nov 02, 2010
0helpful
1answer

How to set up wireless router belkin
First connect a LAN cable from your computer to the Belkin wireless router , then open a browser and enter the Belkin's configuration URL
then login and change the default password, then configure the wireless settings the SSID and encryption.
To secure your wireless network from unauthorized access, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security
Read full answer
11/1/2010 10:38:40 AM • Belkin... • Answered on Nov 01, 2010
0helpful
1answer

Missing latest firmware update file .bin
Updating your Routers Firmware

Locate and download the firmware file from the Belkin support site. (Type in your part number in the search box in the top right and look for "Firmware" in the title)
Save the file to a location on your computer where you can get to it easily, such as your desktop.
Connect the computer to one of the four gray ports on the back of the router.

Open a web browser on the computer.
In the address bar of the web browser, type http://192.168.2.1 and press Enter on your keyboard.
Click Login in the upper right-hand corner of the page. The router does not ship with a password, so just click Submit.
Click on "Firmware Update" toward the bottom of the left-hand menu.
Click the Browse button toward the middle of the screen to search for the file you saved previously.

Select the firmware file by left-clicking on it and then click the Open button in the lower right corner of the window. This will take you back into the router's interface.
Click the Update button.
A prompt asking, "Are you sure you want to continue with upgrading?" will appear. Click OK.
A second prompt will open telling you the router will not respond during the upgrade and warning you not to remove the power supply to the router. Click OK once more.
Congratulations. The firmware has been updated successfully
Read full answer
11/1/2010 12:17:12 AM • Belkin... • Answered on Nov 01, 2010
0helpful
1answer

Dont know how to set it up from my home computer
Step 1 : Connect modem - Router - Computer ( Wired )
Step 2 : Open router setup by typing http://192.168.2.1 on the address bar of internet explorer
ae719cc.jpg
Step 3 : On the left side under internet WAN click Connection Type
Step 4 : leave the Password Blank and click submit
Step 5 : Choose the connection type as dynamic and click next
Step 6 : Leave the Host name blank and click apply
Step 7 : On the left Under Internet WAN Click MAC Address
Step 8 : Click Clone and Click Apply changes
Step 9 : If the Internet status on the top right is connected
Step 10 : Then check if you have internet
Step 11 : if not Then unplug the Power Cable from the Modem And the Router
Step 12 : Plug the power Cord to the Modem
Step 13 : Wait till all the lights are on
Step 14 : Plug the power to the belkin
Step 15 : Check the color of the light in the belkin
Step 16 :If green then Check if you have internet
If not working then call belkin
================================================WIRELESS SETTING UP A WIRELESS CONNECTION
Step 1 : Connect Router - Computer ( Wired)
Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer
Step 3 : On the left under wireless click wi - fi protected setup
Step 4 : Leave the password blank and click on submit
Step 5 : Disable it and Click on apply changes
Step 6 : On the left under wireless click Security
Step 7 : Enable 64 Bit WEP
Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )
Step 9 : Click apply changes
Step 10 : on the left under wireless click channel and SSID
Step 11 :Change the Wireless channel to 6
Step 12 : Change the SSID to a different name ( no Spaces )
Step 13 : Click apply changes
Step 14 : Now Scan and connect to this network ( Wireless )
Let me know if it works
Read full answer
10/31/2010 4:08:39 PM • Belkin... • Answered on Oct 31, 2010
0helpful
1answer

Can not set a password in G modle FSD7231-4
ok let we setup again your wireless security to compatible with your windows 7

Connect the computer to one of the four gray ports on the back of the router.
Open a web browser on the computer.
In the address bar of the web browser, type http://192.168.2.1 and press Enter on your keyboard.
Click Login in the upper right-hand corner of the page. The router does not ship with a password, so just click Submit.

setup wireless security in to 64bit WEP

d3c67d9.jpg
Read full answer
10/31/2010 2:32:22 PM • Belkin... • Answered on Oct 31, 2010
0helpful
1answer

Flashing red modem.
ok here is your solution.

open belkin setup Page for a manually setup.

Connect the computer to one of the four gray ports on the back of the router.
Open a web browser on the computer.
In the address bar of the web browser, type http://192.168.2.1 and press Enter on your keyboard.
Click Log-in in the upper right-hand corner of the page. The router does not ship with a password, so just click Submit.

you'r ready to configure your router manually.

if ISP is DFSL use a user name and password connection type PPOE
is IPS is Cable just clone mac address.

in both of this cases don't forget to power cycle modem and router to get connected
Read full answer
10/31/2010 1:48:46 PM • Belkin... • Answered on Oct 31, 2010
0helpful
1answer

My laptop will not connect
The problem is different settings so the way to solved it is make a manually setup in to your laptop and network in sharing center if vista above.
Read full answer
10/31/2010 1:37:52 PM • Belkin... • Answered on Oct 31, 2010
0helpful
1answer

Belkin say that my router is working but I cannot
Is very important to know the Model number for a better advise,any way here is my solution.

first we need to proved if router is connecting with your desktop or laptop by cable.

Connect the computer to one of the four gray ports on the back of the router.
go to command prompt and type ipconfig

answer need to be like this.

ip address 192.168.2.x
and your default gateway 192.168.2.1

if that is correct next type ping 4.2.2.2 and press enter

if you get 4 reply saying connecting to 4.2.2.2 means you have connection to DNS

let me know what happen
Read full answer
10/31/2010 1:07:50 PM • Belkin... • Answered on Oct 31, 2010
0helpful
1answer

The Belkin wireless router was working for our
WIRELESS SECURITY ISSUES

Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works
Read full answer
10/27/2010 3:44:10 PM • Belkin... • Answered on Oct 27, 2010
0helpful
1answer

New computer with windows 7, router will not let
try Belkin : Support : Setup Assistant for Routers
Read full answer
10/27/2010 2:12:36 AM • Belkin... • Answered on Oct 27, 2010
0helpful
1answer

My Router lock is highlighted
go to Belkin : Support : Setup Assistant for Routers.
Read full answer
10/22/2010 11:46:23 PM • Belkin... • Answered on Oct 22, 2010
0helpful
1answer

Looking for password so i can connect my ipod to
WIRELESS SECURITY ISSUES

Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works
Read full answer
10/20/2010 5:06:41 PM • Belkin... • Answered on Oct 20, 2010
0helpful
1answer

I can't get my belkin 37E1 to talk to the modem an
ISP : EMBARQ

Step 1 : Connect Belkin - Computer ( Computer Should go to Any one of the four the Grey colored Wired slot)

Step 2 : Make sure the embarq modem is not connected to the belkin

Step 3 : Open the Router setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 4 : On The Left under LAN Setup Click Lan Settings

Step 5 : Leave the Password Blank And Click Submit

Step 6 : Change the LAN IP To 192.168.3.1

Step 7 : Click Apply Changes

Step 8 : Connect EmbarQ modem to the Yellow Slot in the Router

Step 9 : Connect Modem - Router - Computer ( Check if you Have Internet !)



Setting Up A Wireless Connection


Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.3.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works
Read full answer
10/20/2010 4:52:33 PM • Belkin... • Answered on Oct 20, 2010
Not finding what you are looking for?
Belkin (F5D7231-4) Wireless Router Logo

469 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Belkin (F5D7230-4) Router (587009)
Belkin (F5D7230-4) Router (587009)

1,179 Questions

Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835)
Belkin Wireless G Plus MIMO (F5D9230-4) Router...

1,053 Questions

Belkin (F5D5231-4) Router
Belkin (F5D5231-4) Router

455 Questions

Belkin Basic Wireless Router
Belkin Basic Wireless Router

426 Questions

Belkin (F5D8231-4) Wireless Router (F5D82314)
Belkin (F5D8231-4) Wireless Router (F5D82314)

409 Questions

Check Out the Mobile Browsers Report
Check Out the Mobile Browsers Report

View all Fixya Reports

Top Belkin Computers & Internet Experts

ExpressFiX
ExpressFiX

Level 2 Expert

691 Answers

Brad Brown

Level 3 Expert

19187 Answers

Alexander

Level 2 Expert

171 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Belkin Computers & Internet

  • Belkin Computers & Internet

Most Popular Question

will belkin g wireless router model

  • Computers & Internet
Loading...