20 Most Recent
Belkin Omniview PS2 (F1D064) 2-port KVM Switch - Page 7 Questions & Answers
N300 router has a steady orange blinking light
The blinking orange power light suggests that there is a problem with your modem. The modem should be plugged into the top ethernet port of your router. Try turning off your modem for 10 seconds and then turning it back on.
How do I resest Belkin
There is usually a small hole on the back or bottom of the Belkin router that you insert a open paper clip into and gently push it in till the unit goes of and starts blinking. It will reset all the settings and passwords to factory defaults. Copy down any important settings you have made before doing the reset.
Thanks for using FixYa
How do I link my Belkin to my Internet modem
If Belkin is a router , Simply plug an ethernet cable from your modem to the Belkin router in ( WAN Port ) , or in any Switch Port ,
Configurre you router so that is it the Gateway for all your traffic locally in your LAN , and make the Router WAN interface be that int connected to ur Modem .
How to delete belkin password?
Press and hold the reset button for about 8 seconds. It'll revert to the factory default settings. Check the documentation to see the default password.
Where do I find drivers for a Belkin USB Hub?
Hi, when you connect a USB hub, operating system (i.e. Windows, Mac, etc ) it should install automatically a generic driver for it, only when you connect a device to USB hub, in example, a camera, you have to install drivers for that specific device according to its installation guide.
Not finding what you are looking for?