20 Most Recent Samsung X05 Notebook - Page 3 Questions & Answers

As far as I know when u try and install new hard drive it will ask for the hdd pswrd ... so do check before u do anything stupid once I have messed up two of the hard dives new and old one too ...

Default pswrd may be 0000 so pls check and do research bfore u do anyting stupid ok

Thanks

If you are updating from Winos XP orsome higher version to Windows 7, an automatic update is run which backup allthe data, installed files and saved application settings.If you freshly install Windows 7 inyour PC, it will remove all the installed applications and saved settings.

Hello and thank you for using Fixya!

You can go to the manufacturer's website and click on support. Enter model number, choose operating system and download all the driver free.

Jennifer

restart the computer in the "safe mode with networking options."
use the following link to go to safe mode with networking

http://www.computerhope.com/issues/chsafe.htm#02
Now, remove the security software if you have any.
install malwarebytes(free version) and scan the computer. www.malwarebytes.com

Link to all drivers for samsung X05
http://www.samsungpc.com/products/x05/x05_supporteddrivers/x05_supporteddrivers.htm
First check drivers are installed or no conflict etc START>Computer (RIGHT Click)>select manage>Left click device manager In the list check your network adapters, also being wireless check for broadcom 802. Some wireless laptops have an external light and switch hope this helps

Windows Start-up Errors
Step one, you need a Windows Installation CD. If you only have a recovery disk set like the ones from HP or Compaq they will not do what you need done. Under normal circumstances however, you can use a Dell disk because the Operating system is on a stand-alone disk. All retail versions are also acceptable as well as upgrade disks. For a rule of thumb, if the disk has the Microsoft hologram it should work.
While the computer is first starting up and you see the manufacturers splash screen, tap F12 (some computers it’s F9, others it may be another key, you may have to watch and see if the computer lists the key strokes for getting to the boot menu. If you still cannot find it, boot into the BIOS settings and change your boot order there. Save your settings and exit, the computer will now seek the cd rom as its boot source first.
Place your Windows disk in the computer and start it up. When you see the test at the top of the page “Press Any Key To Boot From CD” Just hit the space bar to activate. The next screen you will see will most likely be a Windows setup screen, when you see this press the “R” key to get to the recovery console. It will get there, it may take a little time, patience. Once it loads you will be given a choice of Windows installations, there should only be one, if there are more, always pick number one. It may ask for an administrators password, if you have not set this particular password, then just leave it blank and press enter. The next prompt you see is:
C:\Windows>
You need to type the following:
cd \
hit enter. Pay close attention to the spacing between the characters. There is a space between the character “d” and the “\”
You are now at the ROOT of the drive, this is where basic commands can be given and changed. You should now see the following:
C:\>
Now type the following:
CHKDSK /R
Hit the enter key.
The chkdsk /r command also includes the P command and will also look for lost recoverable information in bad sectors.
There are occasions depending on how corrupt the system is, that this process could take several hours, so be patient with it.
Now, after chkdsk has run type the following:
FIXBOOT
Hit the enter key.
It may prompt you with a warning, that’s ok, just continue. When fixboot has finished, type: EXIT hit enter and windows will reboot. When the system reboots, tap the F8 key during this time and you will see the multi-boot menu come up. Scroll to the title “Last Know Good Configuration” and hit the enter key. If you were having some simple drive errors this should have fixed them.

By resetting the CMOS battery all you need to do is to teardown your laptop and have to remove and reinstall the CMOS battery. And for the replacement of the CMOS battery of your Samsung laptop just call SAmsung technical support so that they can give you the exact model of the CMOS battery and where you can have the battery. Thank you.

There will be two possibilities of problem.

1) I have daubt that, Your HDD is not connected properly

2) Your operating System is currupted.

Any display on screen OR not ?

Try to format PC. I will Fix your proble.

Thanks.

Either your battery charger or connections or cable is bad or the charging circuit within the notebook has gone bad. Try another charger first.

Dear,

Its an lens problem. Better you have to change the driver. Due to scractched CDs it will occur.

Cheers
jaggu

changer your screen.. buy new one and replace it that is available in any near shoorom in your area...or go to microsoft and buy from them i thing they have available..

download the latest driver for your wireless network from the following website-http://www.samsung.com/uk/support/download/supportDown.do?group=&group_cd=&type=notebookcomputers&type_cd=05010000&subtype=xseries&subtype_cd=05010300&model_nm=NP-X65&dType=D&mType=&model_cd=&menu=download&prd_ia_cd=05010300&disp_nm=X65.
Installing the driverand restarting the computer should resolve this issue.
// j

Depending on the exact model of your laptop, you should have a row of hot keys just above your keyboard. One of them should have a symbol with a dot in the middle and lines radiating out from the dot. This should turn your wireless lan on and off. When turned on the switch icon should light up. Then all you have to do is to make sure your router can see your computer.

http://www.samsung.com/uk/support/download/supportDown.do?group=&group_cd=&type=notebookcomputers&type_cd=05010000&subtype=xseries&subtype_cd=05010300&model_nm=NP-X65&dType=D&mType=&model_cd=&menu=download&prd_ia_cd=05010300&disp_nm=X65

you can find the drivers here http://members.driverguide.com/driver/detail.php?driverid=282629

If the drive is showing an error (or is missing) in device manager, do the following:

Start Registry Editor (Start, Run and type in regedit then click O.K)
Locate the UpperFilters value under the following key in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
On the Edit menu, click Delete, and then click OK.
Locate the LowerFilters value under the same key in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
On the Edit menu, click Delete, and then click OK.
Quit Registry Editor.

Hope this helps

BUY A NEW LAPTOP! Peace...........