20 Most Recent HP Deskjet 6988 Inkjet Printer - Color - 4800 x 1200 dpi - USB, PictBridge - - Page 9 Questions & Answers

If your printer's status displays "Printer in error state," there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn't open and the paper isn't jammed

There are many small issues and bugs that can arise due to small errors like the printer displaying low ink cartridge level message or not able to print properly. Some of these issues can be resolved by resetting the printer. Let's see the steps for HP ink tank wireless 419 factory settings. Launch BRAdmin and select the printer to reset. Open the "control" menu and then select "network configuration". Type in your password and click OK. You will see an option to "factory reset". Click on that and the process is complete.

It appears to be known problem and the fix is to replace the pickup roller. The problem as you noticed is that it has dried out. https://www.google.com/search?q=HP3390+picks+up+3+pieces+of+paper ..

Nissan has been manufacturing the hardbody double cab since 1986. It is a workhorse that has proved its reliability and durability in the most demanding environments. The 2.4 16V petrol engine provides good performance and fuel economy. The hardbody double cab is available with a variety of options, including a choice of 4x2 or 4x4 drivetrains. It is also offered with a range of different body styles, including a single or double cab.

dismatle the printer and check for some external object in the printer if you cant find check the gears of the printers

tkae out the print edge of the catridge by raising the lever their is propably some clog that have blocked the ink from the black catridge unit by the catridge head hope you understand

go to hp website www.hp.com or go to ebay or amazon website

is it possible for you to upload a video of how it behaves when on

Have you tried reinstalling the software? There is business support, virtual chat and contact details on their T1700 page. It is a business machine, very expensive, their support should look after you. We aren't them, we just have an HP category. https://support.hp.com/us-en/product/hp-designjet-t1700-printer-series/17572077/model/17572078 ..

Try doing what is done in this video to resolve the issue:

Either you have an ink cartridge problem or the printer needs to be updated. More than likely the red has run out first.

Replace the toner

"... dependencies checking has failed" implies that the update program is looking for something from the old firmware or on the hard drive that it needs to run. Run the test page that displays printer information; it should tell you what firmware version is on the formatting board. It may already be the latest version, which would fail the test of having a previous version number. If that is not it, try updating with a firmware version just after the one on the replacement formatting board, then update to a more recent version.

It is supposed to get hot, the toner powder is melted by heated roller. However, it shouldn't jam. See of you can get to the fuser roller and clean it. Then spray it with a dry silicone spray like Jigaloo. Some printers have a rheostat to control the fuser temperature, but only service engineers would know the location and the specs, plus a digital infra-red laser thermometer. Has it ever been serviced? You can also try cleaning the rubber feed rollers with soapy water on a cloth. Rinse with a clean wet cloth and leave to dry naturally. This leaves them a little sticky to grip and feed the paper.

Sadly, the following HP support page offers about 8 dirrerent possible solutions, some of which you may have tried. You likely will have to try the others to see if they eliminate the problem. Myself, I would download the HP Print and Scan Doctor just to see if it worked any magic or offered advice. Alternatively, Here is the support page related to printing issues with this printer: https://support.hp.com/us-en/document/c00599279 https://h30434.www3.hp.com/t5/LaserJet-Printing/A-Vertical-Strip-and-repeated-signs-on-Print-Outs/td-p/5668042 https://www.tonergiant.co.uk/blog/2017/05/black-lines-down-the-page-4-causes-and-how-to-fix/

HP M1136 printers doesn't have E series errors, pl chk

You need to go ahead and simply refresh a service known as "Print Spooler"

here's how you do it..
for Windows XP:
>> click on start
>> click on run
>> type in " services.msc " and hit enter
You will see a list of service names alphabetically arranged on the right hand side..
From there look for the service name "print spooler"
>> right click on it
>> click on stop
wait for 10 secs
>> right click on it again
>> click on start..
>> restart the computer..
>> you will find your document deleted :)

plz rate if you find it helpful. thank you

Make sure the printer is plugged in and turned on. Also check the USB cord; is it plugged in all the way on both ends? Also check the quality of the USB cord to make sure there are no snags.

Can't be very specific without more information. What model? How is it connected to your computer? What OS of computer is it ? 1) reset Turn the printer off and Unplug the printer from the wall, leave it unplugged for more than 30 seconds, replug it, and turn it back on Depending what model of printer you have you may need to press and hold one of the buttons during power-up to reset it. https://www.google.com/search?q=Reset+HP+Inkjet+printer&oq=Reset+HP+Inkjet+printer&aqs=chrome..69i57.6304j0j7&sourceid=chrome&ie=UTF-8 2) unplug and replug the data cables at both ends or re-establish the wireless connection 3) Fully delete your printer drivers, and reinstall them from a fresh download from HP (NOT from some dodgy third-party driver site) https://www.windowscentral.com/how-properly-remove-printer-windows-10