20 Most Recent HP Officejet Pro 8600 - Page 4 Questions & Answers

unplug from mains.load paper.replug into mains,turn on,what happens now?

Throw it away or return to vendor, not worth risking ruining the printer. If it's one you refilled seal the hole where you filled it and maybe try that. Bear in mind it will take a lot of time to remove all the excess ink and it's messy.

This should work (assuming that you are using Windows Vista or newer): Remove the printer from Windows (in Control Panel, Printers And Devices right-click and choose "Remove)" Then choose Add Printer and follow the wizard and it should find your wireless printer automatically. Please let me know if this doesn't work.

please open printer back door check small rubbers rolls clean .. and also front ..clean....dont use ruff papers..and only use good qulity papers

On these printers, thats usually a blank line. You can try to clean the print heads but it usually means a replacement print head is needed.

Not sure. Maybe you should contact shipper/supplier I’m happy to assist further over the phone at https://www.6ya.com/expert/josh_8f8ad0a8f7e0e6d3

This is caused either from a bad or dirty sensor or the drum wiper, if it uses toner.

there is a inc suck up pipe the inc gets sucked up the pipe when the pipe is blocked it cannot remove spent ink or toner it will need cleaning out.

Upgrade your software or clean out color ink head with rubbing alcohol sometimes if color not seated properly the color wont register

Right click on the message 10 documents to be printed and use Cancel All option and afterwards enter into the printer manager to reactivate your offline printer so you have other documents waiting to be printed.

If you have windows, in the taskbar, in the low-right corner, near the clock you might have a printer, which is set to Offline. Therefore all your documents sended to printer are queued in the driver. Enter on the printer manager and Cancell All Documents.

printer mechanism is complaint please replace the round encorder stripp &mechanism lock

i will give the right solution , but give more details how does not works ? , if provide me full details , i will give the proper steps to repair your fax hope helping you Mohamed hejazi work for hp partner

Open the printer utility folder and follow troubleshooting guide.

hello, I will give what is the problem with printer & solution , but i need you to take picture of screen looks like then send it to me , i will give what you have to do . I am working for hp Partner