20 Most Recent LG LMV1813ST Microwave Oven - Page 9 Questions & Answers

1000W

Please e-mail me directly with your FULL model number*, FCC ID number*, + detailed symptom information. ( * on the tag in cooking cavity or around door frame or control frame or on back) William E. Miller, AS-EET [email protected] http://www.microwavecontrol.com

Try ManualsLib here: https://www.manualslib.com/manual/638625/Goldstar-Mv1502b.html . This is the Goldstar MV1502W (or MV1502B). Since the LG MV1502B manual refers to the unit as the Goldstar MV1502, this is probably the same model. I hope this helps. Cindy Wells

Need more information is it running after time out?

$123.85

Check the wiring for the door switches. See my help files: http://www.microwavecontrol.com/safety.htm http://www.microwavecontrol.com/disassembly.htm http://www.microwavecontrol.com/doorsw.htm For more free DIY and other help & advice, feel free to contact me via my site. Please include FULL model number*, FCC ID number*, + detailed symptom information. (* on the tag in the cooking cavity or around the door frame or the control frame or on the back) William E. Miller, AS-EET http://www.microwavecontrol.com Microwave Oven Control Panel Repair Nationwide "Recycling by repairing since 1982"

If the display comes and goes the only fix is to replace the complete control panel, a very expensive part.

take it to a repair shop for a proper diagnosis but generally anything other than a fuse , it will be cheaper to get a new unit

Frequently, on ovens of this type, the fuse is located behind the control panel. The other common location in inside the cabinet where the power cord enters. If you need further help, I’m available over the phone at https://www.6ya.com/expert/david_29ad5d1dd86564b0

Fuse,Time Delay Part Number: PS3522741

Usually, if you push the Stop/Clear button once or twice that will reset the panel. Barring that, unplugging it will almost always work :)

My LG microwave heating is OK but the grilling only not working

Consult lg customer service and buy anew control board.

the control board has failed due rust.

download the manual from google manual download .com