D-Link DP-G321 Print Server - Answered Questions & Fixed issues

Call Printer support phone number 1-888-687-4491 USA Toll-free and find instant support.

Laserjet 1020 is a host-based (WIN) printer. Won't work on DP-G321. Connect using USB to a PC and share it.

You should set Preamble to Short (default is Long) in the WiFi configuration page.

- change the cable
- assure your plug.

It sounds like your windows went into a temporary profile, this is nothing to do with your router. This is a windows problem. i've attached a link that gives you step by step to fix for windows 7 machine.

http://www.winhelponline.com/blog/fix-windows-easy-transfer-error-using-temporary-profile-windows-7/

You need to use the SSID of the wireless router on the print server. Any wireless security applied to the router must also be applied to the print server. Otherwise you have two seperate wireless networks.

check in page setup plz

Yes, but it run like 64 bit, because of the other devices.

I am currently using this print server with the HP Laserjet 1100 on the parallel port and it works flawlessly.

Hello Kawena66,
There may be an ip conflict as the error suggest.
what is the ip address on your XP system?

There should be a pinhole that allows you to do it with a paper clip...

You can find the details of the operator and the state they belong to .the operators wont reveal the address and name of any mobile numbers only higher officials can only get those information.
In order to trace the operator name and state you can try this link
http://www.indiatrace.com/trace-mobile-number-location/trace-mobile-number.php

I hope this will help you if it does do rate the answer
Thank you
regards
lalith

I am sure it is now toast and you cannot downgrade if the wrong firmware has been installed. I would ask D-Link.

https://www.youtube.com/watch?v=zKeXtyUMKjA Check out this video it might help you with your issue.

Please open router page and go to advanced just like in this emulator. http://support.dlink.com/emulators/wbr2310/adv_network.htm

try changing the channel number from auto to a channel number 2 or 3 higher than the lowest channel number.' do this by logging into the d-link dsl 2640

Ethernet/USB Print Server it is for even windows 98 (OMG ) page 7 is setup. NO OS stated by you, at all. why:? page 3 is OS compat. after reset the default address is 192.168.0.10 5volt power pack is NOT OPTIONAL. 1998 what did you read the free manual yet. the last page shows printer compatibility list, does your match? where would you find a printer that old working now. crickets...??? my guess is 2003 year made. XP first release is that. one manual for it stamped 2003 so is 17 years old relic fodder for sure, recycle it is best. first hit https://eu.dlink.com/-/media/consumer_products/dp/dp-300u/datasheet/dp_300u_datasheet_en.pdf RTM ! no 17 year old printer works today, not really.

the manual is free , at dlink dot com you push the reset button for long time per manual 15sec (iirc) the release it and now all defaults are set. per the manual, google dir-655 manual. easy as pie if you just read the manual.

You can get best d-link router support phone number at Toll Free Number ( 1-877-769-0969 ). D-link router Tech Support number ( 1-877-769-0969 )

Warning to FixYa readers -DO NOT CALL THE FAKE TECH SUPPORT NUMBERS POSTED ALL OVER THIS SITE. These phony support numbers or web links send you to criminal call centers where they will install malware, steal ID and/or extort money from you . Please only ever use the support contacts from the official company website {edited by volunteer Expert}