20 Most Recent D-Link DP 300U (DP-300U) Print Server - Page 2 Questions & Answers

I have just setup DP-300U rev.B1 with my Konica Minolta Bizhub 162, the thing is that it doesn't work with USB port connected (paper out), then I tried connecting Bizhub 162 to LPT port, and it works just fine...

d link problum

First thing.. plug printer directly into PC.. does it work? .. if so its is a port setting. If now it is the device config on PC

If Port Setting Issues.. are you going through any other devices on the network or is you firewall blocking the IP.

If device Config issue check to see it is setup up as an IP Port not a normal local port

Hi,

The problem you are having is pretty standard, the IP based printing works for most printers but the scanner require direct(or well faked, direct) connectivity with a USB port which most routers do not provide.

Several companies including Startech and Io Gear make Virtual USB devices which would resolve the issue.

How they work differs as instead of creating an IP printer, the usb device installs on an ip and then a driver you install on your PC(s) connect to the unit over the router and sets up a virtual USB port on your machine so you can re-install the printer as a local printer attached to what it thinks is a local USB port.

Doing this will allow you all functionality the printer offers but will slow down printing and scanning a bit

Hope this Helps,


Chris
Armor-IT

Hi Scott.

Make sure your firewall is set on the Vista to allow the network discovery. Follow this link, click on Networking>File and printer sharing. It will tell you how to setup Vista to work with printer
http://windowshelp.microsoft.com/Windows/en-US/networking.mspxsharing.


This link should help, too. It is just for your Printe server.
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/Windows_Vista/Q_22960040.html

Good Luck!

I connected my HP5MP to the DP-300U LPT1 port.
I configured my port on the DLink Configuration tab, giving it a name "hp5"
...The default login is at http://192.168.0.10/ user:admin pass:(there is no pass by default)

On my Mac, I go to System Preferences > Print & Fax
Click the + to add a new printer
Select the IP option
Choose the Protocol: Line Printer Daemon - LPD
Type in the Address: 192.168.0.10
Type in the Queue: hp5
Print Using: Generic PostScript Printer or better yet, 'Select a driver to use...'
and find the driver for your HP LaserJet 5MP.
Save it. Works like magic. ;-)

If you change the IP address or password on the DLink, just CYA and write it all down on a sticky note then tape the note under the DLink chassis. There's no reset button on the thing, and if you're o a Mac, you won't necessarily have access to the Windows utility to jack with the DP-300U. So, write it down, kidd-o!

You just need to installe the . Inset the Printer Driver CD. It will Autoplay. Click on install the Driver.
After successfully installation of Driver, Go to Start-->Setting--> Printers and Faxes

You can find your printer here.Right Click on Printer --> Click on Sharing --> Give the Printer Name in Share Name.

You can installe the printer on client Machine by following way:

Go to Start-->Setting--> Printers and Faxes--> Click on Add Printer --> Check mark on Network Printer-->Clickn on Browse printer. It will Automatically discover your printer. Just Right click on it and clickon connect.

Check the Printer spool service. If documents are getting increase in que, restart the Printer spool services. It will definatly solve your problem.

You might try to browse to that disk and see if there are any setup files (usually named setup.exe or install.exe). I've seen some drivers don't need to be installed by an installation program not by the new hardware wizard.

What is the IP of the Print Server and the Printer itself? They have to be on a 'flat network' or the gateways of the the 'adjacent' networks have to be defined as a neighborhood.

There should be a pinhole that allows you to do it with a paper clip...

You can find the details of the operator and the state they belong to .the operators wont reveal the address and name of any mobile numbers only higher officials can only get those information.
In order to trace the operator name and state you can try this link
http://www.indiatrace.com/trace-mobile-number-location/trace-mobile-number.php

I hope this will help you if it does do rate the answer
Thank you
regards
lalith

I am sure it is now toast and you cannot downgrade if the wrong firmware has been installed. I would ask D-Link.

https://www.youtube.com/watch?v=zKeXtyUMKjA Check out this video it might help you with your issue.

Please open router page and go to advanced just like in this emulator. http://support.dlink.com/emulators/wbr2310/adv_network.htm

try changing the channel number from auto to a channel number 2 or 3 higher than the lowest channel number.' do this by logging into the d-link dsl 2640

access violation in module Uimain.exe at address oo6F6AB6 read address 000002EC

Ethernet/USB Print Server it is for even windows 98 (OMG ) page 7 is setup. NO OS stated by you, at all. why:? page 3 is OS compat. after reset the default address is 192.168.0.10 5volt power pack is NOT OPTIONAL. 1998 what did you read the free manual yet. the last page shows printer compatibility list, does your match? where would you find a printer that old working now. crickets...??? my guess is 2003 year made. XP first release is that. one manual for it stamped 2003 so is 17 years old relic fodder for sure, recycle it is best. first hit https://eu.dlink.com/-/media/consumer_products/dp/dp-300u/datasheet/dp_300u_datasheet_en.pdf RTM ! no 17 year old printer works today, not really.