20 Most Recent D-Link DP 301P (DP-301P) Print Server - Page 9 Questions & Answers

http://www.dd-wrt.com/wiki/index.php/Known_incompatible_devices

try dlink.com or just google the URL http://support.dlink.com/emulators/wbr2310/lan.htm

why doy you need cd rom, it is far easier to visit dlink website. below is their instructions for setting router manually, remove the extensions if they are not what you want http://support.dlink.com/emulators/wbr2310/lan.htm

visit dlink website, they have lots of advice. you can google the URLyou want http://support.dlink.com/emulators/wbr2310/lan.htm

http://support.dlink.com/emulators/wbr2310/lan.htm look at dlink for mor info

Turn off your DSL/cable modem. Turn it on. Turn off your router. Turn it on. Reboot your computer.

You "bricked" it -- responsibly recycle this "dead" unit, and replace it.

Connect your computer to the router. Assuming Windows 7, click the "Start" button. Type 'cmd' into the search-box, and press ENTER. Type 'IPCONFIG /ALL'. Look for the IP-address of the "gateway" or "DHCP-server". Type that IP-address into your web-browser.

Reset the router to "factory default", which resets the ID/password. Then, reconfigure your router.

Do you have many other wireless networks in your vicinity? It could be interference from those networks.

Do other wireless laptops connect to your wireless router, and give good speeds? Do you have many wireless networks, other than your own, that show up when you try to connect? It could be interference from other wireless networks in your vicinity.

Do a Google-search for 'HB7251M 292'.

See D-Link's support-site: ftp://ftp2.dlink.com/PRODUCTS/ and select your product. Download documentation and drivers.

Connect your computer to your router. It should automatically get an IP-address. Click the Windows "Start" button (Windows 7). Type 'cmd' into the search-box. Press ENTER. Type 'IPCONFIG /ALL'. Look for the IP-address of the "gateway", or the IP-address of the "DHCP-server". That is the IP-address that you want to type into your web-browser.

Straighten one end of a paper-clip. Push it into the hole in the back of the router. Hold it for 30 seconds. The router is now set to "factory" settings, including the original ID/password.

See D-Link's support site: ftp://ftp2.dlink.com/PRODUCTS/DAP-1350/REVA/ and download the "Quick Install Guide".

Read this http://forums.dlink.com/index.php?topic=44909.0

LAN cable or WiFi?