20 Most Recent
D-Link AirPlus DI-614+ Wireless Router - Page 4 Questions & Answers
Connection is visible, but when I click connect it
1. Reposition the router to another location.
2. check for firmware updates.
3. You will need to connect with a RJ45 cable to do the updates so that the connection doesn't drop.
Wireless routers with drop connectivity if there is an electronic interference such as a cordless phone or microwave.
How can I find the pin# for my D-Link Di 614+
Are you trying to connect to the wireless network on the windows VISTA / 7 computer?
Sometimes it willl ask you for PIN number. you don't need to enter the PIN number.
On the same page you will get the option, I don't want to configure, i want to enter the key.
click on it and it will go to the next step. if you network is secured then it will ask you for the network key.
Enter the key and it will connect you to the network.
If you are trying to add any other wireless device in the network then try to bypass this step and connect to the network manually.
We have a DI-614+ that seems to have been
Since it is not accepting the default admin login, it means that you have changed this before. If you cannot remember it, then you will need to reset the router.
Please be aware that resetting the router will bring all settings to default, hence, internet connection will be interrupted.
At the back of the router, there is a reset button. Press and hold the reset button for 30 seconds. Then power cycle the router.
Then, try again to access the setup page of the router.
I hope this helps! Good luck!
Just purchased iMac with Snow Leopard OS. Apple
Basically ypu will need to change the wireless settings of the router.
To change the wireless settings you will need to access the router set up page.
Is there any computer connected to the router? If not then you will need to connect one computer to the router with the cable. Open the set up page of the router and change the wireless settings of the router. When you change the wireless security settings, change the wireless network name also ( SSID ). Once you change the SSID and the security on the router, you will need to connect to the wireless network on all the wireless devices with the new network name and security
Click here for step by step instructions
I want to put password on my
You will have to dial in to your router to do this. After supplying your user name and password, follow the promps and set your network password/s. If you mean security for a wireless network, then you need to set a WEP in the setup procedure. You need to clarify a bit more.
Once i key the default gateway into my browser I
If the default blank password is not accepted, you have only two options. You can hold in the reset button on the back of the unit for about 15-20 seconds, and this will reset the device to factory defaults. This means you will lose any configuration in place on the unit, but the setup wizard should quickly get you back connected to the Internet.
(Alternatively, of course, since it sounds as if the router may have been configured by someone, and the password changed, an easy answer would be "ask that person what the password is".)
I inherited a D-Link DI614+ Wireless Broadband
Are you trying to set up the router.
You can do it manually without the CD.
Make sure that your computer is able to go online through the modem.
If your computer is able to go online through the modem
Then you need to connect the computer to the router ad the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for step by step by instructions
Can't find my disk to
Hello,
Thanks for using FixYa.
You can get all the Dlink Di614+ file at:
ftp://ftp.dlink.com/Gateway/di614+/This device doesn't need a driver. All you need to to be able to properly set up your ISP settings to the router. You can try to contact your ISP (internet service provider) to get router settings.
I hope this helps. Thanks and good day.
- HotRatchet
Everything was working 2 hours
You will need to check the wireless settings of the router
is there any computer connected to the router ?
If yes then you can open the router set up page on that computer.
Router set up page is the page where you can check all the wireless settings of the router.
Click here for step by step instructions
I have a wireless d link router di-614 i never set
Hi,
Here are the steps on how to set a password on your router.
Open your Web browser and type "http://192.168.0.1" into the URL address box.
Then press the Enter or Return key.
The logon pop-up screen will appear.
Type "admin" for the username and leave the password field blank.
Click OK
Once you have logged in, the Home screen will appear.
Click Run Wizard. You will see the following screen.
Next
Step 1 - Set up your new password. You have the option to establish a
password.
Click Next
Step 2 - "Choose your time zone", you will be prompted to select the
type of Internet connection for your router (see next page).
Click Next
The Setup Wizard (continued)
Select the type of Internet connection for your router.
Select one of these settings
If you are unsure of which setting to select, please contact your
Internet Service Provider.
Click Next
If you selected Dynamic IP Address, this screen will appear:
Click the "Clone MAC Address" button to automatically copy the MAC
address of the network adapter in your computer. You can also manually
type in the MAC address.
What is a MAC address? Each network adapter has a discrete Media Access
Control (MAC) address. Note that some computers and peripherals may
already include built-in network adapters.
Click Next
If your ISP requires a Static IP Address, and this option is selected,
then this screen will appear:
Do not use
Enter the IP address information originally provided to you by your
ISP. You will need to complete all the required fields.
the numbers displayed in these fields. They are only shown as an
example.
Click Next
If your ISP uses PPPoE (Point-toPoint Protocol over Ethernet), and this
option is selected, then this screen will appear:
Enter in the username and password provided to you by your ISP.
Click Next
The Setup Wizard (continued)
Wireless Setup The default wireless settings are: SSID = default
Channel = 6 You can change these settings to match an existing wireless
network.
Click Next
Encryption The DI-614+ is capable of three levels of wireless
encryption - 64bit, 128-bit, and 256-bit. By default the encryption is
disabled. You can change the encryption settings for more secure
wireless communication.
Click Next
Your Setup is Complete!
Click Restart
Click Close
You will be returned to the Home tab.
Test Your Internet Connection
Click Exit Then relaunch your Web browser
Can't get in router to make changes.
are you using Internet explorer . If yes then go to Tools on the internet explorer. go to Internet options.
Go to connections tab. on this page you will find the option " never dial a connection" make sure that it is selected.
check the IP address on the computer. try to ping the default gateway number.
Click here for more information about the router and network
Cna't get in D-link to make changes I tose not
you reset the router.
when you reset the router , it will come back to the factory default settings. now you will need to reconfigure the rotuer according to your Internet service provider.
Are you able to go online when connected directly to the modem.
If yes then conect the computer to the router and open the set up page of the router.
Chnage the wireless settings also
Click here for more information about the router and the network
Will not connect to netflix via samsung blue ray
You need to register your device with netflix to enable streaming. You may have a firmware update to install as well to enable this feature. Once enable the player should have an option to provide a registration number to the netflix url.
Try here for the update:
http://pages.samsung.com/us/bluraysupport/index.jsp
It seems like my dlink router keeps reseting or
Yes you're correct the router is the problem, this can be a firmware of a hardware error already, you can try first doing a firmware upgrade on the router and then reset it by pressing the reset button for 10 seconds while power is ON and then after that reconfigure the router and check if everything is working now...
Not finding what you are looking for?