My new configuration security i cannot access until now instead of the default password is admin. thus, i need to resolve it...
and to reset or to restore
when we forgot all.so from which purpose we can reset the router password i want the solution urgently.
Posted on Jun 01, 2013
how to install dlink dir 615
Port opening
Posted on Apr 22, 2009
is it possible to stop others connecting to our internet account.
Follow the instructions on this D-Link page (it shows DI-614, but it is the same procedure for your model):
http://support.dlink.com/faq/view.asp?prod_id=1055
Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309
Posted on Apr 26, 2009
Set Secutiry on Router http://192.168.0
Set security on router with IP address http://192.168.0.0, not
http://192.168.0. you'll also need to know the password to enter
the router's configuration/management page - check you manual - the default password will be there.
Posted on Oct 13, 2010
On a dlink dir-600, after enabling access point mode, the configuration web-pages are no longer found after entering 192.168.0.1 on IE
Connect your router to computer with ethernet cable then you can access it with following default link.
http://192.168.1.1
or
http://192.168.2.1
or
http://192.168.0.1
If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it.
Then it ask for user name and password.
Type user as "admin" and password as "admin" or "password" or blank.
Then you can see configuration page of router.
If you are still not able to access it with above ip then press RESET button for 10 seconds it is in back side of router.Then you can access it with 1 of the above ip.
Let me know if you need further assistance.
Thanks for using FixYa.
Posted on Jul 03, 2010
can't connect http://www.192.168.1.1 to get Voip phone connection
first your address should be
http://192.168.1.1
with out www ok
if this dosnt work try this
MAKE sure you computer ip address is manuall configured to
ip address 192.168.1.2 or 192.168.1.3
subnetmask 255.255.255.0
note
if you get a ip address conflict keep change the last decimal in ip addres from 4 -223
ex192.168.1.x (value of x)
Posted on Apr 11, 2010
i just set up a dlink dir-300 router and i cannot find the space where i put a passwork to my network. is it in the wireless setup page?
u have to setup as wep
then enable secure network then set encryption key.wihc is prompt for connect network.
Posted on Dec 30, 2008
My D-Link DIR-615 wireless n router has a gateway of 192.168.0.1. I type this into the URL, and it won't work. I can access this router from every other computer on my network by doing this. It isn't the wireless card, because I've tried doing it with multiple wireless cards. I also cannot access files from other computers. My operating system is Windows XP Media Center. I've already tried turning the firewall off. The internet on my computer works fine. I can change the IP address of the wireless card on this computer, so apparently the router sees the computer fine.
I posted a solution I was given on May23. I fogo my password and I was entered as a guest. In addition to the information I furnished above, I also spoke with a tech from my DSL carrier (Embarq), this tech had me do a reset on modem and router. When this did not work they transferred me to the tech from Netgear who furnished me with the information that I passed on. My next idea is to go to Circuit City and speak to Firedog and see if they might have some insight. I will pass along any information I find out.
Posted on May 23, 2008
The status light stops blinking after I turn the router on and no internet browzing possible.
I pushed the reset button and tried other stuff but no good result.
Should I buy new one or is there any way to get it fixed?
To reset your router, use the following steps:
The router has now been reset.
The unit should now reboot, and once the WLAN light stops blinking the router should be reset.
Posted on Apr 22, 2008
how do i access my wifi security code
By physically connecting to the device
Logging on to gateway thats if you know username and password for router. Then you can start looking from there
Posted on Nov 07, 2009
719 questions posted
Usually answered in minutes!
1,082 Questions
984 Questions
709 Questions
532 Questions
482 Questions