Top 20
Formex 4 Speed 650017024 As6500 Watch for Men - Page 3 Questions & Answers
My dango watch second hand stops some time
If your Dango watch's second hand stops intermittently, there are a few things that could be causing the issue. Here are some possible reasons and solutions:
1. Low Battery: If the battery in your watch is running low, it could cause the second hand to stop. You may need to replace the battery in your watch. Check your watch's manual or take it to a watch repair shop to have the battery replaced.
2. Dirt or Debris: Dirt or debris can get inside your watch and cause the gears to stop moving properly. If this is the case, you may need to have your watch cleaned and serviced by a professional watch repair person.
3. Loose Second Hand: If the second hand on your watch is loose, it could cause it to stop intermittently. A loose second hand can be caused by a damaged pinion or cannon pinion. You may need to take your watch to a professional watch repair person to have it fixed.
4. Magnetic Interference: Magnetic fields can interfere with the movement of the gears inside a watch, causing it to stop or run erratically. If you have been around strong magnets or electronic devices, it could be causing the issue. Try moving your watch away from these devices to see if that helps.
5. Mechanical Issue: There may be a mechanical issue with your watch's movement that is causing the second hand to stop. This can be caused by a worn out gear or other component. You may need to take your watch to a professional watch repair person to have it fixed.
3/14/2023 2:24:23 AM •
Watches
•
63 views • 0 helpful votes
How to change to show right day of week
Impossible to answer. On WHAT!!!
All questions need FULL 'make model (what it is)'.
Google
make model manual
Normally on that type of device you have to set the YEAR, and then the MONTH like on my Weather Station Indoor Unit..
..
3/19/2023 5:15:34 PM •
Watches
•
51 views • 0 helpful votes
How much is a base metal bezel 2018 fmdxge012if184 worth
It's difficult to give an accurate estimate of the value of a specific item without more information and context, such as the condition of the item and any additional features it may have. However, in general, a base metal bezel for a 2018 FMDXGE012IF184 watch is likely to be worth less than one made of precious metal like gold or platinum.
The value of a base metal bezel watch can vary greatly depending on the brand, model, and condition. It could be worth anywhere from a few dollars to a few hundred dollars. It's best to consult with a jeweler or a watch expert to get a more accurate estimate of the value of your specific watch.
Additionally, you can also check on online marketplaces such as eBay or Amazon to get a sense of the price range of similar watches that are being sold.
1/15/2023 6:49:54 AM •
Watches
•
74 views • 0 helpful votes
Can't set time on my Ott light - when I push S button, it does not flash
It sounds like you are having an issue with setting the time on your Ott light. Here are a few suggestions that may help you resolve the problem:
- Check the owner's manual for your Ott light. It should have instructions on how to set the time and troubleshooting tips for common issues.
- Make sure that the light is plugged in and the power is turned on. If the light is not receiving power, the time cannot be set.
- Check the batteries in the remote control. If the batteries are low or dead, the remote may not be able to communicate with the light and the time cannot be set.
- Make sure that you are pressing the correct button on the remote to set the time. Some Ott lights may use a different button or sequence of buttons to set the time.
- If the light is still not responding to the remote control, try resetting the light by unplugging it and then plugging it back in. This may reset the light and allow you to set the time.
If you have tried these steps and are still having trouble setting the time on your Ott light, you may need to contact the manufacturer or a customer service representative for further assistance. They may be able to provide additional troubleshooting tips or repair the light if it is experiencing a hardware issue.
12/26/2022 3:46:17 AM •
Watches
•
82 views • 0 helpful votes
Change battery on aqualite 30M watch
Hi,
please view the back of the watch and look for screw or plastic latch that you can use to open the back and access your watches battery. You can search amazon or bestbuy for a replacement battery and then order it. But if you find it hard to open the back of the watch, you can visit a local watch store to help you with that and they might have a replacement battery for you as well.
Thank you.
12/10/2022 11:56:12 PM •
Watches
•
119 views • 1 helpful votes
Need help with removal of 97P144 links
Removing links from a 97P144 watch band can be a bit tricky, but with the right tools, it can be done. Here is a step-by-step guide on how to remove links from your 97P144 watch band:
- Gather the tools: You will need a small screwdriver, a pair of pliers, and a link removal tool (specifically designed for removing links from watch bands).
- Locate the link pins: Look at the back of the band and locate the link pins that hold the links together. These will be small, thin pins that run through the links and hold them in place.
- Use the screwdriver: Use the small screwdriver to push down on the head of the link pin, and then use the pliers to gently pull the pin out of the link. Be sure to keep a firm grip on the pin as you pull it out, as it can be tricky to remove.
- Repeat the process: Repeat this process for each of the link pins that you want to remove.
- Use the link removal tool: Use the link removal tool to push the link out of the band.
- Reassemble the band: Once you have removed the desired number of links, reassemble the band by pushing the link pins back into place and securing them with the screwdriver.
Be sure to take your time and work carefully, as you don't want to damage the band or the watch itself during the process.
11/7/2022 4:48:23 AM •
Watches
•
190 views • 0 helpful votes
How do i shutdown hourly beep in mingrui spots watch
To turn off the hourly beep on a Mingrui sports watch, you can try the following steps:
- Press and hold the "Mode" button until the watch enters the settings menu.
- Use the "Adjust" button to navigate to the "Beep" or "Alarm" option.
- Press the "Adjust" button to turn off the hourly beep.
- Press the "Mode" button to exit the settings menu.
Please note that these steps may vary depending on the specific model of Mingrui sports watch you have. It's recommended to refer to the user manual for your specific watch for detailed instructions.
9/20/2022 6:33:57 AM •
Watches
•
626 views • 0 helpful votes
Not finding what you are looking for?