i have tried holdng the reset button down for 30+ seconds, i have unplugged the power for over a min.....and yet i still cant access it.....i need help please, is there another way to access this router i have looked on google but no luck to a solution
Hi
Open command prompt and do ipconfig and make sure that you are getting a valid IP address .
Default gateway should be 192.168.2.1.and if you are not getting valid ip address then check if your ip is assigned manually under TCP/IP properties .It should be obatin an ip address automatically .
Also make sure that modem is connected to modem port .
Also try to disable all firewall from your computer
If you are getting valid ip address and then try to ping 192.168.2.1 in command prompt .check if your getting any replies .If your are getting replies then it could be issue with your Internet explorer settings
Let me know if it doesn't work .Feel free to send me a mail [email protected]
Posted on Sep 18, 2008
So I've got my broadband connection set up and Xbox live is working at last. However, when my friends try to party up with me, it doesn't work. Tested connection, points towards a strict NAT. So I need an open NAT and after countless hours searching, I've tried portforwarding and dropping firewalls but to no avail.
It's a Thomson/Spedtouch TG585 v7 router, my PC connects to it wirelessly and my 360 connects by LAN to the PC. PC uses XP.
Any questions/things I've not added that I need to.... just ask!
Thanks
First, try adding a wireless card to the Xbox, run the wireless off of the router OR if you have multiple connections (broadband, should be an "In" port, and several "Out" ports) Try connecting your PC and you Xbox through the "Out" ports, with the cable modem cord hooked into the "In" port...
Posted on Feb 04, 2009
I installed my wireless router but did not lock it and my neighbours are using it how can I lock my router it is a belkin 54.
I'm not sure if this is the correct model, but the steps should be similiar. Please follow the link to the belkin website and follow their instructions:
http://www.belkin.com/support/article/?lid=en&pid=F5D7230-4&aid=10177&scid=0
Posted on Mar 15, 2009
why does my belkin g wireless modem router f5d7634 always disconnect every hour? i already turned the firewall off and yet it still disconnects from the internet. the globe led does not turn off but i cannot access any site. so i always have to unplug the router and plug it again or sometimes restart it from the router webpage. please help me. thanks
some settings:
UPnP Enabled
Firewall Disabled
WLAN MAC Address (erased it)
Wireless Enabled
Mode Mixed (11b+11g)
ESSID Broadcast Disabled
SSID Belkin
Channel Auto
Security Enabled
try to reduce the MTU settings on your router.
If possible upgrade the firmware of the router.
Click here for more info about the networking
Posted on Oct 07, 2009
how do i access my belkin 54g settings
To access in your router, open a blank Browser page and type :
http://192.168.2.1 normally it's this ip :)
(note that A lot of routers setup pages are accessed through [192.168.1.1]).
username : Admin and at password leave it blank otherwise Type : admin
Posted on Oct 15, 2009
how do i secure my belkin 54g router? we only want people who are in the house to access it
Contact Belkin for Care at 1-800-585-2494 Toll Free!
Posted on Dec 15, 2016
how can I lock my belkin 54g router
1. Type http://1912.168.2.1 in your browser This gets you into the router's configuration
2.Look for the tab that says wireless settings or something similar
3. Look for security tab
4. Secure the router using one of the security schemes provided...whatever you use remember and write it down somewhere or you will have to reset your router if you forget your password and want to make changes to the router's configuration.
Posted on Dec 23, 2009
i need the security code to connect my laptop to my router
You will need to check the wireless settings of the router .
Is there any computer connected to the router with the Ethernet cable?
If not then connect 1 computer to the router and open the router set up page. Once you open the router set up page, you will be able to find the wireless network key.
Use that password to connect to the wireless network
Click Here for step by step Instructions on how to find the network key
Posted on Dec 26, 2009
How can I make my router private so no one else can connect to it?
to make your router private u will have to get acces to ur router firs if u cant just reset the router from the back the log to the internet and if u cant conect type this192.168.1.101 the brand name of the router appear then enter the user name and pasword if u cant type ADMIN in the user then press enter then go to settings and chose WEP share key and type your password recomment to use a strong password ok then click save. also create a user name while u in thre ok. that will reset the router after that go to my network conection right click on ur wireless router name and go to propertis then chose the WEP share key and type the password then ok. that will set ur router privated ok. good luck
Posted on Mar 28, 2010
router setup
Take a look at the setup manual: http://www.belkin.com/support/dl/p74559-a_f5d7230-4_man_6-04.pdf OR here: https://web.belkin.com/support/
Posted on Mar 23, 2013
352 questions posted
Usually answered in minutes!
697 Questions
487 Questions
417 Questions
336 Questions
285 Questions
