20 Most Recent Gateway Belkin 54g Wireless DSL/Cable Router (DHF5D72304) - Page 4 Questions & Answers

Ok here is your solution.

1. let me know your Windows operating system
2. check your Security type setting in your router
3. channel and SSID sharing
4. disable Firewall in router
   

Check your windows firewall and some anti virus who cant also block your signal.Go to setup page Belkin using 192.168.2.1

If you cant open it just reset router,go in the back of your router and locate the reset ping.
if you still cant do it just check your physical connection and go to command prompt using RUN and type CMD after ping router 192.168.2.1 and you will get a four answer and zero lose.
if you still cant do it ask me for a remote setup in your pc .

If you are able to open Belkin setup page using 192.168.2.1
Check all configurations and be sure you can setup it to wep64 bit security mode and your problem will be solved.

go to Belkin : Support : Setup Assistant for Routers

thumbs me back

First, try adding a wireless card to the Xbox, run the wireless off of the router OR if you have multiple connections (broadband, should be an "In" port, and several "Out" ports) Try connecting your PC and you Xbox through the "Out" ports, with the cable modem cord hooked into the "In" port...

WIRELESS SECURITY ISSUES

Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works

The WEP CODE Is the Password for your wireless network


WIRELESS SECURITY ISSUES

Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works

WIRELESS SECURITY ISSUES

Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works

Try Belkin Support http://www.belkin.com/support/

Is there any computer connected to the router ?
If not then you will need to connect the computer to the router.
Do not change any wireless settings on the router with the wireless computer.
you will need to connect the computer to the router with the Ethernet cable.
check the IP address of the computer.
open the router set up page of the router.
Here you can change the wireless settings of the router.
Now once you change the network anme and security on the router, you will need to connect to the wireless network on your wireless computers.
Click Here for step by step instructions

Reset it via the hole in the rear.

WIRELESS SECURITY ISSUES

Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works

Please go to Start - run -and type cmd then type ipconfig take the gateway and open the internet explorer and type the gateway in the addressbar in the internet explorer then type the username and password Admin admin. and take the networke password.

Use an Ethernet cable between a LAN port on the router and the network-port on your computer.
Start Internet Explorer.
Access the "built-in" web-server inside the router.
Use the web-interface to set an SSID, the encryption-level (use 'WPA' instead of 'WEP'), and the password/passphrase.

u can download a third party program to hack their wep key

You need to enable WEP security in router follow below procedure to secure your wireless network.Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on wireless settings then wireless security then enable WEP security and enter WEP key it is your password to connect wifi.Then save settings and restart router . Then when anybody try to connect your wifi it ask for that password. Let me know if you need further assistance. Thanks for using FixYa.

IN order for you to check the IP address and default gateway of your computers it will be better if you check it under command prompt. To do that click Start > RUN then type CMD and hit enter then the command prompt will open type there IPCONFIG and hit enter and there you will see the information that you need.

There will be a tiny reset switch. Do it. Default username and password are "admin" and "admin".

Please enter the IP address of the Router in the internet explorer and enter the user name and password of the router.(admin, admin). When the windows will open, you can see the wireless security. When you click on that you can see the security key. Other wise you can change the security key.

Hi,

XBOX 360 is alredy wifi enabled you dont have to plug a thing in to it, if you want to configure wireless

All you got to do is turn on your wireless router/access point and try to search for available network in Xbox 360 and upon selectin the network it would ask for wireless key (WEP key cab found on the back or bottom of router) punch in the key and bingo...its done
Your box is ready to be wirelessly connected to internet and play online

alternatively if you dont ahve a wirelss router or you are facing difficulty is seraching wireless router or finding the security key

Connect the router to modem > then connect the router and XBOX with an ethernet cable
It will work

Else you can also try connecting the modem and XBOX with an ethernet or USB cable

(However in all the aboove scenario, please ensure the modem is getting the internet link through the normal RJ11 or phone cable, please dont unplug that else though your XBOX would be connected to Modem or router but it wont get internet connection)

Go into the router (probably 192.160.1.1) - find the security tab - set the pass.

Ipods don't connect to routers. Ipods plug into USB ports on your computer.