Toshiba Portege 3505 Tablet PC - Answered Questions & Fixed issues

You need a replacement keyboard.

It is said that Windows Password Recovery Tool is the best Windows Password hacker expecially on Toshiba computer. It takes only 4 minutes to hack computer passwordMore interest, feel free to read this helpful post:http://www.windowspasswordsrecovery.com/hack-computer-login-password.htm

That BIOS-password exists to protect you, should a thief gain posssession of your computer.

Find your original sales-receipt, to prove that you are the rightful owner, and telephone Toshiba.

Ask for Technical Support -- they can help you "nullify" that BIOS-password.

Assuming you mean a CD/DVD, you don't unless you have an external dvd drive.

i believe this is your part number is P000363830

you can always confirm by looking at the screen itself. the part number is usually on the back of the screen on a small piece of sticker

Hit escape repeatedly while booting. When you get an error message that says hit F1 DO IT. Then you will enter bios.

OK, Do 1 thing, start pc press del go in side of BIOS.
Set the 1st booting drive as USB CD ROM. and save that. then restart your system.

pls get ur cdrom service & try again but prior to that pls check ur data cable which is connected to ur pc

Keep hitting escape while starting up. Message will say there is an error and hit F1. Hit F1 and you'll enter bios.

The first thing I would do is install is a PCMCIA wireless card. If you are able to log in to your network with the PCMCIA wireless card, I would be leaning towards replacing your internal wireless card.
Hope that helps.....

There is no factory settings for windows. You can restore the system to it`s old position from "system recovery"

Using the pen is quite simple.
You extract it from its storage space and use it as a mouse, left clicking it as you would a mouse.
By pressing the tip of the pen on an area on desktop or on an application window and maintaining the pressure for a short while, you activate the context menus (the equivalent of a right click.)

On the Windows task bar (for Windows XP) there is a small icon near the start button that shows a pen pointing outside: that is the input panel. Click the icon with a mouse or your pen, and an input area opens. In that area you write with the pen (writing Pad) or enter letters and symbols one at a time (Character Pad) or use a virtual keyboard.

Under the red X that closes the input panel there is a small gear. C;ick the gear with the pen or a mouse to configure the settings.

Your pen may have an eraser at the rear end and/OR on the side. It is used to erase characters or whole sentences.

To actually record (write) what you enter with the pen you must have a text-editing application open and running.
Whenever you approach the pen to the screen near a text-area (search area of IE or other compatible applications) a small icon appears to be clicked to enter text. This happens is you select UNDOCK in the input panel configuration.

This should get you started with the pen. Try these steps, and if you have any other questions post them as comments to this thread and it will be my pleasure to answer them.

Take the computer to a Toshiba Certified Service Center to have the password reset or erased. You may have to show proof of ownership.

try to boot to windows xp or dos command, for winXP go to recovery console-select your windows-type the admin password then if C:\WINDOWS come up type chkdsk /r if that doesnt help, repair your operating system or backup your files and reinstall your operating system.

First , try letting "Windows Update" install new driver. Be sure to plug in any USB devices you want to use BEFORE you start Windows Update. That way ,Windows Update will detect these USB devices as well as your USB hub. Because it may be that your external USB device is the problem.

Try this:At startup, before you get the Windows splash screen,hit the F8 key to see if you can start in safe mode. If you can, the password for administrator may not have been set, in which case you can log on without entering one.Otherwise, you'll have to do a reinstall of Windows or, when starting the reinstall, when the computer says it's loading drivers, etc, you can press CTRL F10 and that should get you to the screen where you can see the passwords. Here's a link: http://www.mydigitallife.info/2006/11/25/easily-login-to-windows-xp-with-no-password-administrator-account-backdoor-trick/

its some hard to do but maybe you can

. Your notebook
2. An empty formatted diskette (720 kb or 1,44 mb)
3. A second computer (e.g. a DOS desktop PC)
4. A hex-editor (e.g. Norton DiskEdit or HexWorks)

This is what you have to do:

1. Start the desktop PC and start the hex-editor
2. Put the disk in drive A:
3. Change the first five bytes of sector 2 (boot sector is sector 1) to: 4B 45 59 00 00
4. Save it! Now you have a KEYDISK
5. Remove the disk from drive A:
6. Put the disk in the notebook drive
7. Start the notebook in Boot Mode (push the reset button)
8. Press Enter when asked for Password:
9. You will be asked to Set Password again. Press Y and Enter.
10. You now see the BIOS configuration where you can set a new password

Does the laptop have a usable cd/dvd rom drive?

YES

Sorry, but flash player is no longer compatible with smartphones or tablets.