Humminbird 586c - Answered Questions & Fixed issues
Transducer is throwing up a large Rooster tail.I installed it to instructions
Might help to tell us what kind of boat - deep V hull 22 ft.? bass boat with shallow V hull? Some need the transducer closer to the centerline of the vessel while others do better more outboard, Naturally they need to be flush with the hull no matter where they are located. Depending on the transducer, you could also try properly mounting it inside the vessel near the transom. Good new is you are getting good info from it. Cheers Pete
12/13/2017 10:25:08 PM •
Humminbird 586c
•
Answered
on Dec 13, 2017
•
451 views
586c is supposed to track
Go to the Menu and check your settings. There are tolerances you can adjust the sensitivity so it will track smaller objects. Here is a helpful link to the manual for your Humminbird if you don't have it.
http://store.humminbird.com/media/document/586c_596c_HD_DI_Manual.pdf
8/30/2011 2:37:56 PM •
Humminbird 586c
•
Answered
on Aug 30, 2011
•
102 views
Humminbird 215 max fish finder- Replaced batteries and now won't turn on, the batteries are good and connections are good.
Brand: DIVTEK New water bicycle - Pretty Fast. Sport Fun, Take a Deep Breath. Cool Inflatable Water Bike.Significant TIPS : Please check the FREE conveyance time prior to purchasing our water bicycles. After you consent to the transportation time, then, at that point you can submit a request. We don't acknowledge discounts on the way, Hope you can comprehend. much thanks Bike boat Up. Our Water Bikes Bike boat. A elite water bike - customary bike position. Lightweight, simple to utilize, flexibility and clean. Appropriate for: Aquatic Parks, Aqua Lakes, Rivers and ocean, and Good thought for Local Water Bikes Rental Business HIGH QUALITY: The water bicycle is made of 6061 aluminum combination outline with heating. The outside is compact and lovely. The pedal and seat both have a dependable quality. Elite: The heading control framework without paddling capacities is steady, solid and simple to keep up. The transmission framework made of a high-strength coordinated belt is both waterproof and rustproof. The buoys are physically produced using 1000D 0.9mm polyurethane covering. Your floor is furnished with light and safe scoring strips. follow the linkhttps://waterbaike.blogspot.com/2021/06/with-water-divtek-water-bikes.html
7/2/2021 5:39:50 AM •
Humminbird...
•
Answered
on Jul 02, 2021
•
130 views
How to connect Humminbird fish finder to Motorguide trolling motor
I would use slip rings to tie existing cable to prop motor support shaft and mount transducer to motor housing. 'slip ring'--metal ring a little bigger than shaft with a nipple the size of the cable. OR call the bird at 1-800-633-1468 or www.humminbird.com/Category/Company/Contact-Us/ and use some southern/country slang when talking. Best of luck 'you all'.
11/2/2016 6:20:48 PM •
Humminbird...
•
Answered
on Nov 02, 2016
•
791 views
My humminbird 898c is stuck on the loading screen, won't turn off or anything, any ideas?
First steps (you may have done done) check all wiring connections ,transducer, power,ext. at both ends. Attempt power up again. No change. Call 1-800-633-1468 with model & serial #'s. OR Disconnect all cable connections from unit and with a strip of aluminum foil short out all the connections on the 898c.(not the cable). Attempt power up again. If unit will let you go to 'System Status' screen & record. Hope your unit works.
10/28/2016 7:24:49 PM •
Humminbird...
•
Answered
on Oct 28, 2016
•
1,671 views
My depth finder loses its depth reading at about
You need to set the transducer lower. When at speed, the hull of the ship raises up out of the water and hence your transducer is probably not deep enough at these times to give a proper reading.
9/5/2014 5:49:46 AM •
Humminbird...
•
Answered
on Sep 05, 2014
•
1,939 views
Depth starts jumping all over
Several things could cause this:
Stratified water temperatures. if the water is undisturbed and there are layers of warm and cool water, this can cause the problem. Fresh and salt water layers can also cause this.
Debris in the water. can cause it as well. layers of turbid water and clear water can be a problem. If these are not issues, then make sure all connections are tight, and that there is no bottom paint on the transducer.
3/12/2014 2:46:37 PM •
Humminbird...
•
Answered
on Mar 12, 2014
•
274 views
Not finding what you are looking for?