20 Most Recent Belkin N600 DB Wireless Dual Band N Router - Page 8 Questions & Answers

The only thing on the cd is usually just a manual. If that is what you need, you can download it here: How to find your Belkin routers user manual

There is usually a small hole on the back or bottom of the Belkin router that you insert a open paper clip into and gently push it in till the unit goes of and starts blinking. It will reset all the settings and passwords to factory defaults. Copy down any important settings you have made before doing the reset.
Thanks for using FixYa

If Belkin is a router , Simply plug an ethernet cable from your modem to the Belkin router in ( WAN Port ) , or in any Switch Port , Configurre you router so that is it the Gateway for all your traffic locally in your LAN , and make the Router WAN interface be that int connected to ur Modem .

1. Try resetting the router. You will have to set it back up after. 2. Update any firmware - go to Belkin's site, or there may be an option in the router's control page/application to check for and apply any updates. 3. The router itself may just be going bad and need replacing. It happens after a while.

Press and hold the reset button for about 8 seconds. It'll revert to the factory default settings. Check the documentation to see the default password.

Hi, when you connect a USB hub, operating system (i.e. Windows, Mac, etc ) it should install automatically a generic driver for it, only when you connect a device to USB hub, in example, a camera, you have to install drivers for that specific device according to its installation guide.

Sounds like a driver, if you connect you computer with an Ethernet cable to your router temporarily, it may automatically find the software from the internet. If you would like some help, I could always connect to your computer remotely, and install it for you. Just provide me with an email address to contact you on so that I can help you out. Andy