20 Most Recent Lexmark N4000e Print Server - Page 8 Questions & Answers

Connecting your jump drive to any USB port , of your computer should add an additionnal Drive to the lost of your device under "my Computer,
Once tou located this drive and it's letter you can simply copy paste any file or folder from your computer into it.
Hope this answers all your questions Please remember to Rate/vote for any solution that helps you out. Leave a comment if you need more help. Thanks for using Fixya

make sure the ip of the client computer is correctly assigned to server

Some printers are not happy being RE-FILLED. Which is a shame. Go find an origional NEW carterage and I'll bet it will be happy.

Any drivers you need can be found on the lexmark website. Note that some printers need the software installed before hooking up the printer. I'd try to install the printer first. The software will tell you if the printer needs to be connected.

I would sugest that you click "ignore" and continue with the install if it will. You havent said which operating system you are using or if it is 32 bit or 64 bit or the model number of your printer, so I cant help much than give you general help. If you are using Windows 7 64bit you might have a problem if your printer is a couple of years old, as you cant use a 32 bit driver. I have found this to be the case with a number of printers and if you cant find the correct driver etc. from the web site try looking for a universal one on the site. You will need to know what your operating system is though. Normally windows 7 will find its own drivers but you might need the printer application software to set cartridge alignment etc. A nice email to lexmark support might help you source the correct package you need.

copy the cd to a usb storage device using other computer with optical drive then transport it to your laptop.

If the printer is no longer turning on, there is a power issue.

However if your printer is turned on and just unresponsive, try the following:

Go to > Start > Control Panel > Printers and Other Hardware > Printers and Faxes >

Make sure your printer has a little check over it. (set to default)

If that doesn't work, you can try uninstalling and reinstalling the printer driver for the machine.
(at the same time ensure your computer is virus free)

If all fails after the steps above, the machine is declared nonfunctional and went bad.

Hope this helps ya

You might have to uninstall the printer restart your computer then reinstall your printer click start control panel administrive tools computer management device manager scroll to ports(COM&LPT) + to expand you should see a communication port and Ecp printer port you might see a yellow?question mark this will mean you need to install a new driver for this device right click you will have options to update driver,disable,uninstall or select properties again you will have the similiar options also you can troubleshoot the device hope this helps

did you take off the tape in front of cartridges they sould have a pull tab and see if your prinyer has a clean contacts as well use qtip with water on it only jim

what model is your lexmark i can find the drivers for you, and you can also try going to lexmark.com and doing a driver search or just google the model and type drivers. make sure the website is a lexmark site, you will get both the drivers and the software for the printer.

Ask for a refund. Either that, or try to find a .iso of the installation disk online, burn it to a cd, and continue from there.

Let me try to fix the printer first.
1. Go to control panel>printers and look at the icon of your printer. What does it have under it? Ready? Online? Offline? Is there a check mark for default printer? Right click the icon and select which option fixes it. Work online, make default printer, ETC. Click apply and then ok. Let me know if this gets you going and then I can try to give you some options on the cable. You can buy an adapter kit from Walamart that has different types of plugs to usb. Thanks for using FixYa and let me know what happens.

Hi,

Thanks for asking FixYa for help. My name is Jeff and I will be assisting you today. You can download your manual here .

Simply choose "User's Guide for Windows or (Mac) for Mac. If you are in need of additional help, please let us know.

Thank you for allowing us to help you today.

go to this link
http://www.ehow.com/how_5886941_add-printer-wordperfect-6.html

you have a wordperfect 6

or a plug in?

a code ten fault is telling you that the printers cover is open / it also piggy backs on the code 11 factor that states no printer cartidge detected try opening and shutting the printer lid several times


merry christmas

hiya

is your printer a lexmark if so go here and look for your driver :-

http://www.lexmark.co.uk/lexmark/site go to support & drivers

hello


let me know this information below, i can resolve the issue .

what is the operating system on your computer ? Win98, Winodws XP, Windows 7 ???
what is the printer model ?

more importantly, according to Lexmark error codes, E-C-1 means "replace ink cartridge"

go to this website to explain further

http://support.lexmark.com/index?page=content&id=SO4438&actp=search&viewlocale=en_US&userlocale=EN_US&segment=SUPPORT&productCode=&searchid=1275158659149

uninstall previous driver and give me your email i'll send the driver.. (please note what kind of operating system you are using)