20 Most Recent Linksys EtherFast 10/100 16-Port Workgroup Switch [ EZXS16W ] (104834) - Page 6 Questions & Answers

It doesn't have one. Wireless setup is done from the touchscreen menu. Here is a video link to get you going.... http://www.inkhub.com.au/ink/wireless-set-canon-pixma-printers

https://www.youtube.com/watch?v=ZbCp03mTq1I search youtube !

I can help you with this remotely if you like? Do you have an ethernet cable to temporarily connect your computer to the router? I will help you find the driver you need Andy

Access the router page by typing 192.168.1.1 in add bar. password admin wireless---- sub tab wireless security ------ you can find from there

You actually may not have set up a password on the router. It comes from the factory with a default. The default username is left blank and the default password is "admin". If that doesn't work, then there is a different password on the unit. You can clear the password by doing a factory reset on the device, but then you will need to use the defaults to go back in a set up the device all over again. The external reset method is to press and hold the RESET button on the bottom or the back of the unit (it may be recessed into a small hole that you will need to use a paperclip on) for a minimum of ten seconds.

Change the position of the WiFi router, because there are things like duct work, metal studs and electrical wiring concealed in the walls that can and will have an effect on WiFi signal strength.

When you plug it in, it will be enabled and wont have any security features. So you need to set up wireless security and passwords if you are using wireless. Note that you can only set it up if you are connected to it with a cable from the computer. It should have an installation CD that makes the process easy.

Are you trying to cascade two wireless routers? If yes, here's how:

1. First make sure that the first router (will serve as the server router) should be working. And then get the IP address of the server router.

2. Connect a CAT5 cable from the WAN port of the server router and the other end of the CAT5 cable should be connected to any of the LAN ports of the client router (which is the second router).

3. Then connect a computer directly to the client router and access its WEB UI.

4. Disable the DHCP server capability of the client router and set a static IP on the client router and make sure that it has the same IP range as the server router so that they would communicate.

5. After making sure that the two routers are on the same IP range, connect a computer to the server router and then ping the IP of the client router. Once you can ping it, then it should work.

If you're having a trouble with the setup or should you wish to have more information about the router, then refer to the router's user manual for necessary information.

Good luck and have a great day!

If you don't know how to install Linksys 3500 router password setup then you follow the given steps:- 1. Login the Admin. 2. Click on Advanced 3. Go to the Administration 4. Click on Set password 5. Enter old password. 6. Enter New password. 7. Repeat New password. See image & Visit- http://www.linksysrouter.supportphonenumber.com/

You will need to reset the device.

by default it uses the most strong signal to connect. You can change connections manually - no exact steps since have no idea what system you're running on

The manual, here : https://www.timewarnercable.com/content/dam/residential/pdfs/support/WirelessRouters/linksys_wrt54g_ug.pdf gives on page 20 this:

for securing your linksys router, first you need to connect your linksys router with computer via cable. then you need to open router setup page on your browser. Once you will be there , you need to click on wireless security. now you need to select your wireless protocol and type your password in. Finally you need to click on save settings and your password will be setup . you can enjoy with it. Thanks,

Using web browser enter the default ip of the linksys device. Make sure a port on the router is connected to your PC. Also ensure you configure the PC is on same subnet as your router. Login with the default credentials. This should take you to the router interface where you can set up SSID and security for your WIFI