20 Most Recent
Kingston Digital DataTraveler 4000 8 GB Flash Drive DT40008GB USB Hard Drive - Page 5 Questions & Answers
Install new memory
To answer your question we need you PC make model what you are planning to upgrade from what memory. Thanks
9/25/2011 11:13:07 AM •
Kingston...
•
Answered
on Sep 25, 2011
I am trying to put
hellow maam/ser .! Make sure you have the right memory part for your computer. next step is Confirm that you configured the memory correctly. Re-install the module. Clean the socket and pins on the memory module. Update the BIOS.
8/20/2011 1:02:32 AM •
Kingston...
•
Answered
on Aug 20, 2011
Whenever I insert the micro
click start control panel
administration tools computer management device manager scroll through all of
your devices if you see a yellow question or exclamation mark ? ! or a red X
you will need to update the drivers for this device right click select update
driver/reinstall driver
if you can see your usb
device but its not working sroll to Ports(Com&Ltd) right click to update
driver
if you computer came with a
motherboard disk the drivers could be on ithope it helps
8/11/2011 6:16:08 AM •
Kingston...
•
Answered
on Aug 11, 2011
Purchased 128GB data traveler and
No, if the traveler would have been bad you wouldn't have been able to put the files on it. The files you are trying to play need special codecs that the player doesn't have.
8/2/2011 5:49:56 AM •
Kingston...
•
Answered
on Aug 02, 2011
My 8 gb pen drive
click start control panel administrive tools computer management disk management right click on your drive select properties click tools you should see click check now click start two boxes automatically fix files and scan for and attempt recovery of bad sectors place then a tick in both boxes then select check now start or you might tick one box then return after its finished the first repair then return and tick the second box you should not do anything while the chkdsk utility is in progress any input may damage this drive hope it helps you
7/15/2011 7:10:44 AM •
Kingston...
•
Answered
on Jul 15, 2011
When i insert my moden
If you have another machine to test on try plugging it into it and see if it works. If it does, then on the laptop power it off unplug the power cable, then take out the battery and let it sit for a few minutes, the put battery back in and connect power cable and restart machine. It should start working again.
6/13/2011 5:19:14 AM •
Kingston...
•
Answered
on Jun 13, 2011
My usb stick is not
click start control panel administrive tools computer management device manager scroll down universal serial bus controllers you should see a yellow question mark?
right click to reinstall drivers
if you can see your usb drive but its not working
ports(com&lpt)right click update driver
click start click on my computer you should see your pen drive
right click then select format
another way is to control panel administrive tools computer management disk management right click on your drive select format
hope this helps
5/26/2011 4:56:26 AM •
Kingston...
•
Answered
on May 26, 2011
They can't read a data
click start control panel administrive tools computer management device manager scroll down universal serial bus controllers you could see a yellow question mark?
right click to reinstall drivers
if you can see your usb drive but its not working
ports(com&lpt)right click update driver if this fails to fix the problem
check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts
click start control panel administrive tools ,computer management ,device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red x
right click to reinstall drivers
hope this helps
5/18/2011 12:30:43 AM •
Kingston...
•
Answered
on May 18, 2011
I am unable to install
if you are having trouble
with your drivers
here is a general look at the
drivers and how to update them
if your computer came with
a motherboard disc the drivers could be on it
click start control panel
administrive tools ,computer management ,device manager look through all
of your devices if you see a yellow question mark?or exclamation mark
! or red x
right click to reinstall
drivers or
if you can see your usb but
its not working
ports(com&lpt)right
click update driver
hope this helps
4/22/2011 10:46:24 PM •
Kingston...
•
Answered
on Apr 22, 2011
I have 4 gb kingston
click start control panel administrive tools ,computer management ,device manager scroll down universal serial bus controllers you should see a yellow question mark?
right click to reinstall drivers or
if you can see your usb drive but its not working
ports(com&lpt)right click update driver
check the USB leads that attach to the motherboard usually red-white-green-black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts also
scroll to disk drives if you can see your drive + to expand right click you should see options to update driver,disable,uninstall scan for hardware changes. or
select properties you should see options in the general tab to troubleshoot,policies,volumes,driver and details under the driver tab you will have the options to check the driver details,update driver,rollback driver or uninstall
hope this helps
don
3/1/2011 4:57:16 AM •
Kingston...
•
Answered
on Mar 01, 2011
I CANNOT FORMAT MY KINGSTON
Click Start
Click Run
Type CMD
Press Enter
Type CHKDSK /F m:
where 'm' is the drive-letter assigned to the Kingston.
When this "check-disk" completes, Windows will remove the "read-only" attribute.
11/15/2010 8:28:29 PM •
Kingston...
•
Answered
on Nov 15, 2010
My flash drive cant be
If your pc has virus it wont allow to format either the pc or the flash drive may have some virus in it try out to insert in virus free pc and try to format it..
8/20/2010 9:03:54 AM •
Kingston...
•
Answered
on Aug 20, 2010
My 4GB USB is not reading on any PC anymore. I
Ok what you need to do is go into device manager, remove all devices from there remove and delete any drivers. reboot. Now try inserting the USB device again. If after doing this the PC still will NOT, "See" the device. Then this is Bad. You have few options at this point. If you can, please try and use it on another PC, see if it will work on that one. If it again will NOT work, then we must now assume that the Drive has faulted in such a way as it is unrecoverable. I suspect what has happened is that the USB drive has been "Spiked" It may be damaged beyond repair.
It may be possible to recover data but I would doubt it. You WILL be able to IF it can be "Seen" but if not, then I do not think you will be successful.
www.usbdriverecovery.org/ -
www.softwarepatch.com/tips/howto-file-recovery.html -
A couple of data recovery links above. Good Luck.
3/30/2010 5:54:06 AM •
Kingston...
•
Answered
on Mar 30, 2010
My phone has been puk, what will i do?
PUK code can be given only by your service provider which is specific for each and every mobile number.
Contact your sim customer care department over phone. Its free of cost to get the pin or puk no. If you cant contact through your phone get some other phone and contact them.
Go to the nearest service outlet of your service provider they can also help you.
There is no other go than the above procedure only your service provider cangive it nobody else in this world nor any software.
Go to the below link and you can confirm that the above procedure works and there is a testimonial given by the customer too. http://www.fixya.com/support/t3582685-phome_lg_ke670_put_security_code_phone
3/11/2010 11:00:55 AM •
Kingston...
•
Answered
on Mar 11, 2010
The wires are exposed that lead to the power ac
Wires that lead from your AC, (Power), outlet, TO the AC adapter? If so, throw that adapter in the trash before it starts a fire.
Look online. There are many choices for a new AC adapter.
8/4/2009 10:23:03 PM •
Kingston...
•
Answered
on Aug 04, 2009
Memory problem
Hi furgan_138,
Did it appear to compete the password creation successfully? When you create a password on these drives it actually splits the storage area into two peices. A public zone and a private zone (private zone is the area that is password protected). Perhaps you seleted as much as you could for the private zone and the 18MB is actually the public zone you are seeing. Try logging in and check what capacity you see on the private zone.
Kingston Tech Support
1/14/2009 6:02:03 PM •
Kingston...
•
Answered
on Jan 14, 2009
Not finding what you are looking for?
